Bait Boats & Components
15
%
Special Offer
5.8GHz Antenna for Bait Boats
€13.60*
€16.00*
BearCreeks 5.8 GHz bait-boat antennaReplacement antenna that screws onto the stern fitting of compatible 5.8 GHz bait boats. Package: one antenna.Compatible platform familiesBearCreeks Navic Scavenger, Navitec, iCatcher, iCatcher Mini, Navimate and Carpmate; Waverunner MK4, Atom, Shuttle and Sport; Quad Transporter and Explorer; KINCARP V1/V2/V3/V4/V6; Anaconda Wave Hopper, Wave Jet and TANK.Before orderingConfirm 5.8 GHz radio generation, connector thread, antenna position and original shape. It is not suitable for 2.4 GHz or 40 MHz systems.FittingSwitch off the boat and handset, screw the antenna on by hand without forcing it and complete a dry-land range and control test.
20
%
Special Offer
Battery lead with DC5525 / XT60H-F Connector
From
€2.32*
€2.90*
BearCreeks black battery cableReplacement black battery lead for compatible BearCreeks bait-boat battery systems. It can be used with a suitable lead-acid or lithium-battery installation when the connector and electrical specification match.Compatibility checkCompare the plug shape, contacts and cable ends with the original cable.Verify battery type, voltage and polarity before connecting.Do not use the cable if the connector or electrical specification differs.Package and safe fittingPrice and delivery scope are for one cable. Disconnect the battery before fitting, avoid pinched or strained wiring and test the connection on dry land before using the bait boat.
15
%
Bait Boat Rubber Seal in Meter
€10.20*
€12.00*
BearCreeks bait-boat rubber seal by the metreReplacement rubber sealing profile for maintenance of compatible BearCreeks bait boats. Sold by the metre; order quantity represents the required length.Compatibility checkCompare the seal cross-section, width, height, contact surface and total length with the original part and product photos. This is not a universal seal.FittingRemove old residue, clean and dry the surface, cut carefully without stretching and check the hull or hatch for a continuous seal. Adhesive is included only if stated.
15
%
Special Offer
Bait Boat Hopper Drop Electro Magnet Set
From
€21.25*
€25.00*
Bait Boat Hopper Drop Electro Magnet SetRelease magnets for the electromagnetic control of bait-boat hopper doors. This system lets compatible flaps open quickly and quietly without servo control. The set mounts at the prepared points in the hull and connects to the mainboard; no drilling or complex gluing is normally required.Choose the correct quantitySelect 4 magnets for Scavenger and other boats with two hopper doors, or 2 magnets for a single feeding chamber. Check the installed release system before ordering. Screws are not included.Compatible bait-boat platformsSelected BearCreeks Scavenger, iCatcher, Navitec, iCatcher Mini and Carpmate models, plus compatible Waverunner, KINCARP, Anaconda and Quad platforms. Compatibility varies by model and revision: compare operating voltage, connectors, mounting points, mainboard and hopper-door design with your existing parts.Installation and testingDisconnect the batteries before installation. Keep electrical connections dry and test every hopper door repeatedly on land before using the boat on water.
15
%
Special Offer
Scavenger Bait Boat Hopper Rubber Seal
€18.70*
€22.00*
This hopper rubber seal fits between the bait boat hull and the hopper door, preventing water from entering the boat during use. The seal is easy to install and provides an extra layer of protection for your bait boat.
International model names for this base platform: BearCreeks Scavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1, MK2, MK3 and MK4; Quad Bait Boat TRANSPORTER; ANACONDA SEA GUARD; ULTIMATE BAIT CRUISER; Vega Boat; Carp Academy; CARPBOAT; KINCARP V1; K-KARP BLACK QUEEN; Carp Royal LORD; Carponizer. These names refer to the same base boat platform in different markets. Compatibility depends on the hopper profile, seal dimensions and model generation. Compare the product photos before ordering.
15
%
Special Offer
Lithium Battery for BearCreeks Scavenger and Navitec bait boat 23,4Ah
€182.75*
€215.00*
BearCreeks 12V 23.4Ah lithium battery for bait boatsHigh-capacity lithium battery for compatible Scavenger, Navitec and related bait-boat platforms. Depending on load, speed, weather and operating conditions, it can provide up to six hours of runtime.Technical dataVoltage: 12VCapacity: 23.4AhDimensions: 14.3 × 6.4 × 9.8cmRuntime: up to 6 hours under suitable conditionsCompatible platformsScavenger/Scavenger Pro, Navitec/Navitec Pro, Waverunner Atom and MK2/3/4, Anaconda Sea Guard and Tank II, selected V1/V2 boats, Carponizer, Carpboat, Bait Cruiser/Mini and Quad Transporter/Explorer. Always compare the installed connector and battery compartment.Charging and storageUse only the specified BearCreeks lithium charger (LitBatCh). This battery is not a direct replacement for lead-acid systems; conversion may require compatible software and service work. Recharge every two to three months during storage and observe the bait-boat manual.
Navitec Bait Boat Weed Guard "New Style"
€25.00*
New-style weed guards for Navitec bait boatsThis BearCreeks replacement pair protects the propeller area from weeds, fishing line, deadwood and other debris while allowing water to flow around the drive. The new-style shape is intended for the Navitec base platform and replaces worn or damaged guards.Compatible base-platform namesBearCreeks Navitec, Navitec Pro, iPilot15 and NG15; Waverunner Atom; Quad Bait Boat Explorer and Quad V2; Anaconda Tank and Tank II; Ultimate Bait Cruiser Mini; Vega Boat Mini; Carp Academy Small; Carpboat Mini; Kincarp V2; K-Karp Tormenta; and Soul Bait Solution. Compatibility is limited to boats using the same new-style guard shape and mounting points.Delivery and ordering checkDelivery contains one pair of weed guards. Mounting screws are not included. Before ordering, compare the product photos with the fitted part and verify guard shape, mounting-hole spacing, hull generation and propeller clearance.Safe installationDisconnect the battery before installation. Reuse only suitable undamaged fasteners, align both guards without tension and tighten evenly without damaging the plastic hull. Turn each propeller by hand and complete a dry-land function test before returning the boat to the water.
15
%
Special Offer
Propellers for Scavenger, iCatcher and Navitec Bait Boats
€10.20*
€12.00*
Replacement propellers for BearCreeks Scavenger bait boatsThese durable ABS propellers restore efficient propulsion and manoeuvring when the original blades are worn, damaged or lost. They attach to the motor shafts with the appropriate fixing screws.Compatible base-platform namesBearCreeks Scavenger and Scavenger ProiPilot50 and NG50Waverunner MK1–MK4Quad Bait Boat TRANSPORTER and ANACONDA SEA GUARDULTIMATE BAIT CRUISER, Vega Boat, Carp Academy and CARPBOATKINCARP V1, K-KARP BLACK QUEEN, Carp Royal LORD and CarponizerCheck before orderingPropellers are not universal. Compare the product photos and verify shaft diameter, fixing method, propeller size and left/right rotation with the parts already fitted.Installation and safetyDisconnect the battery before installation. Fit each propeller in the correct position, tighten the screws securely without overtightening and check that both propellers rotate freely. Complete a low-power dry-land check before returning the boat to the water.
15
%
Special Offer
Lithium Batteries for iCatcher, Cult Ranger, SKARP S60 and Wave Hopper Bait Boats
€169.15*
€199.00*
Комплект литиевых аккумуляторов 12 В для совместимых прикормочных корабликовМощный сменный источник питания для увеличения времени работы совместимых корабликов, эхолотов и систем GPS/автопилота.ХарактеристикиНапряжение: 12 ВЁмкость: 20,8 А·чРазмеры: 15 × 3,4 × 8,5 см (Д × Ш × В)Гарантия на аккумулятор: 6 месяцев со дня покупкиПроверка совместимостиДля платформ BearCreeks iCatcher в литиевом исполнении и соответствующих моделей Cult Ranger, SKARP S60 и Anaconda Wave Hopper. Сверьте размеры, разъём, полярность и зарядную систему. Версии со свинцово-кислотными аккумуляторами требуют переоборудования.Зарядка и хранениеЗаряжайте только предназначенным литиевым зарядным устройством BearCreeks. Отключите питание перед установкой, защищайте соединения от влаги и подзаряжайте каждые 2–3 месяца. Перед спуском на воду проверьте функции на суше.
15
%
Special Offer
Advanced Jet-Like Weed Guard for Scavenger Bait Boat
€29.75*
€35.00*
Jet-style weed guards for Scavenger bait boatsUpgrade the compatible bait boat platform with the newer BearCreeks jet-style propeller guards. When used with the required longer-shaft motors, their streamlined design can increase boat speed by up to 50% while helping to reduce weed contact and support quieter, more efficient running.Compatible platform namesScavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1–MK4; Quad Bait Boat Transporter; Anaconda Sea Guard; Ultimate Bait Cruiser; Vega Boat; Carp Academy; Carpboat; Kincarp V1; K-Karp Black Queen; Carp Royal Lord; Carponizer.Important compatibility checkThis is the newer jet-style version for longer-shaft motors. Compare hull generation, guard shape, mounting points and product photos before ordering.InstallationDisconnect the battery, install both guards securely and perform a dry-land clearance and rotation test before returning the boat to the water.
15
%
Special Offer
BearCreeks Bait Boat Bag Deluxe Large
€58.65*
€69.00*
BearCreeks Deluxe Large bait boat bagLarge transport bag with separate space for a bait boat, batteries and accessories, plus an outer pocket suitable for a solar panel.Protection and carryingA padded PVC mat provides a clean surface for the boat and helps protect it from hard banks. Three neoprene handles and a padded shoulder strap support comfortable carrying.Compatible boatsAnaconda Sea Guard, BearCreeks Scavenger, Waverunner MK2/3/4, Quad Transporter, Bait Cruiser, Angling Technics Microcat, Viper MK3 and Blue Sky Lakestar. Check the boat dimensions before ordering.Internal dimensionsWidth 55 × depth 25 × length 80cm.
15
%
Special Offer
BearCreeks Scavenger Bait Boat Hull Screws (Male and Female) 33 Pairs
€24.65*
€29.00*
Male and female hull screw set for Scavenger bait boatsBearCreeks replacement fastener set for securely joining the upper and lower hull sections of the compatible bait boat platform.Compatible platform namesScavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1–MK4; Quad Bait Boat Transporter; Anaconda Sea Guard; Ultimate Bait Cruiser; Vega Boat; Carp Academy; Carpboat; Kincarp V1; K-Karp Black Queen; Carp Royal Lord; Carponizer.Package contentsMale and female hull screws only; no additional components or accessories.Check before orderingCompare product number V1HULLSCREWS, hull generation, thread, screw dimensions, positions and product photos with the fitted parts.InstallationAlign the hull halves correctly, start every fastener by hand and tighten evenly without overtightening or damaging the seal.
15
%
Special Offer
BearCreeks Scavenger, Navitec and iCatcher Bait Boat Motors
€75.65*
€89.00*
Replacement bait boat motors for Scavenger, Navitec and iCatcher (pair)This BearCreeks replacement set contains two drive motors for Scavenger, Navitec and iCatcher bait boats. It is intended for repair or maintenance when the original motors are worn, damaged or no longer operate reliably. Motor couplers with oil seals and propellers are not included and must be ordered separately.Compatible modelsBearCreeks Scavenger platformBearCreeks Navitec platformBearCreeks iCatcher platformDesigned for BearCreeks Scavenger, Navitec and iCatcher bait boats; check the motor dimensions, connectors and mounting points against your installed drive system before ordering.Check before orderingCompare the product photos, motor dimensions, voltage, connector, cable length, shaft, coupler and mounting points with the motor currently fitted. Reuse or order additional mounting parts only where suitable.Safe installationDisconnect the battery before work. Keep electrical connections dry, secure the motor and drive coupling correctly and check free rotation. Complete a full dry-land propulsion and steering test before returning the boat to the water.
15
%
Navitec Bait Boat Screw Set for Upper and Lower Hull – 19 Pieces
€12.75*
€15.00*
Navitec upper and lower hull screw setSet of 11 matching screws for fastening the upper and lower hull of a Navitec bait boat. The nuts are already fitted in the upper hull; the screws are inserted through the lower hull.Scope of delivery11 hull screws. Upper and lower hull, nuts, seal and other components are not included.Compatibility checkDesigned for the corresponding Navitec hull assembly and not a universal screw set. Before ordering, compare the boat model, hull generation, number and position of holes, thread, length and head type.Safe installationDisconnect the battery and electronics. Seat the hull seal correctly, start every screw by hand and tighten evenly in a cross pattern. Do not overtighten. Perform a careful splash and leak test before use.
15
%
Special Offer
Navitec Bait Boat CPU Mainboard
€92.65*
€109.00*
Navitec Bait Boat CPU Mainboard – Non-GPS VersionThis BearCreeks replacement mainboard restores the central control functions of a compatible Navitec-platform bait boat. It connects the boat’s main electrical components and is secured at the prepared mounting position in the centre of the lower hull with two screws, without drilling or gluing.CompatibilityDesigned for non-GPS versions of BearCreeks Navitec, Navitec Pro, iPilot15 and NG15, plus compatible base-platform models including Waverunner ATOM, Quad EXPLORER/QUAD V2, ANACONDA TANK/TANK II, ULTIMATE BAIT CRUISER mini, Vega Boat mini, Carp Academy Small, CARPBOAT Mini, KINCARP V2, K-KARP TORMENTA and SOUL Bait Solution. For a GPS-autopilot boat, use the corresponding V2.PCB-MainboardGPS instead.What is includedOne non-GPS CPU mainboard as shown. Mounting screws, wiring looms, switches, receiver, motors, lights and other electrical parts are included only when expressly stated in the current offer.Check before ordering and installationCompare the board layout, revision, dimensions, mounting points, every connector and pin assignment with the board already fitted. Disconnect all batteries, protect connectors from moisture and static discharge, and complete a full dry-land test of steering, motors, lights and release functions before returning the boat to the water.
15
%
Special Offer
BearCreeks Deluxe Bait Boat Bag - M
€50.15*
€59.00*
BearCreeks Deluxe M bait boat carry bagA practical PVC carry and storage bag that helps protect compatible bait boats and keeps essential accessories organised at the bank.Storage and carrying comfortEasy-clean PVC materialTwo outer pockets for a handset, batteries, chargers and toolsAdditional outer pocket suitable for a solar panelThree neoprene carry handles and a padded shoulder strapTwo large outer zips for easy accessCompatible bait boatsNavitec, iCatcher, Carpmate, Navimate, Waverunner Atom and Shuttle, Angling Technics Procat, Standard and Technicat, Viper Icon and Blue Pocket Rocket. Compare your boat dimensions before ordering.DimensionsExternal: 46 × 66 × 25cmInternal: 39.5 × 62 × 22cm
15
%
Special Offer
Lithium Batteries for BearCreeks Navimate & Carpmate bait boat
€160.65*
€189.00*
Two 12 V lithium batteries for compatible bait boatsThis set contains two rechargeable lithium batteries, each rated at 12 V and 15.6 Ah. The indicative operating time is approximately five hours, depending on load, speed, conditions and battery condition.Voltage: 12 V per batteryCapacity: 15.6 Ah per batteryDimensions: 10 × 7 × 4.5 cm per batteryTotal weight: approximately 1 kg for both batteriesCompatible bait boatsDesigned for lithium-equipped versions of BearCreeks Carpmate, Navimate and iCatcher Mini, as well as compatible platforms sold as Waverunner Shuttle, iPilot18, Waverunner Sport, iPilot20, Trend Micro, Quad Kompact and Anaconda Wave Jet. Check the boat version, voltage, battery dimensions and connector before ordering.Charging and conversionUse only the specified BearCreeks lithium charger. These batteries are not a direct replacement for lead-acid batteries. Converting a lead-acid boat requires the correct hardware and software configuration.Storage and careRecharge the batteries every two to three months during storage, even when the boat is not in use, and follow the boat manual for charging and storage. Incorrect use can shorten battery life. The stated warranty period is six months from the purchase date.
15
%
Special Offer
Scavenger Bait Boat Mainboard
€92.65*
€109.00*
The BearCreeks Scavenger Baitboat Mainboard is a necessary component to control all important functions of your bait boat. Designed to be fixed in the top hull, installation is easy and hassle-free with pre-existing holes. Please note that if you have a Scavenger bait boat with GPS, you will need to order the V1.PCB-MainboardGPS instead.
International model names for this base platform: BearCreeks Scavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1, MK2, MK3 and MK4; Quad Bait Boat TRANSPORTER; ANACONDA SEA GUARD; ULTIMATE BAIT CRUISER; Vega Boat; Carp Academy; CARPBOAT; KINCARP V1; K-KARP BLACK QUEEN; Carp Royal LORD; Carponizer. These names refer to the same base boat platform in different markets. This mainboard is not universal. Verify voltage, system generation and every connector. Compare the product photos before ordering.
20
%
Special Offer
BearCreeks Bait Boat Lead Acid Battery Charger
€12.00*
€15.00*
BearCreeks charger for lead-acid bait-boat batteriesReplacement charger for compatible bait boats that use lead-acid batteries. It is intended for the matching battery and charging connection, not for lithium batteries.Compatible bait-boat platformsSuitable platform names may include BearCreeks Scavenger, Navitec, iCatcher, Carpmate, Navimate and iCatcher Mini, plus compatible Waverunner and other equivalent base platforms. Always check the battery and original charger rather than relying on the boat name alone.Check before orderingVerify battery chemistry, voltage, charger output, connector shape and polarity.A lead-acid battery with a yellow connector requires the matching adapter cable.Do not use with lithium batteries or a mismatched electrical specification.Safe chargingCharge only in a dry, ventilated place on a non-flammable surface. Inspect the charger, cable and battery before use and disconnect the charger after charging.
15
%
BearCreeks Bait Boat 5.8GHz 4 Channel Digital Remote Control Manufactured by FLYSKY
€92.65*
€109.00*
BearCreeks 5.8GHz 4-channel bait boat remote-control setDigital FlySky handset set for compatible 5.8GHz four-channel bait boats, with separate motor trim, forward/reverse speed control, LED control and hopper or hook-release operation.Functions and package contentsClear display shows handset and boat-battery voltageSensitive left joystick operates hopper doors and hook releaseDetented right joystick supports steady forward travelSupplied with matching receiver and antennaCompatibility and safe operationFor selected BearCreeks Navitec, Carpmate, iCatcher, iCatcher Mini and Navimate platforms, plus compatible 5.8GHz four-channel boats. Compare receiver generation, connectors, antenna and channel functions before ordering. Do not hold the left joystick continuously: prolonged activation can overheat the release magnets and damage wiring. Return the right joystick to neutral to stop the boat.
iCatcher Bait Boat Rubber Seals for Power Sockets
€5.00*
Rubber seals for iCatcher power socketsThis set contains two BearCreeks rubber seals for the power sockets of compatible bait boats. The seals help protect the charging connections from splash water, dirt and wear and support a secure fit around both sockets.Compatible bait boat platformsBearCreeks iCatcher and iCatcher ProiPilot40 and NG40CULT RANGERANACONDA WAVE HOPPERSKARP S60 and CARPBOAT SKARPKINCARP V3These names refer to the same base boat platform in different markets.Check before orderingCompatibility depends on the socket dimensions. Compare the product photos, seal profile, diameter and installation position with the parts currently fitted to your boat.Safe installationDisconnect the battery before fitting. Seat both seals without stretching or pinching them, keep electrical contacts dry and complete a full dry-land charging and function test before returning the boat to the water.
Navitec Bait Boat Hopper Door
€18.00*
Hopper door for compatible Navitec-platform bait boatsThis replacement hopper door fits the prepared mounting points in the lower hull and is secured with eight suitable screws. It restores the closing surface for the bait compartment.Compatible platformFor BearCreeks Navitec, Navitec Pro, iPilot15 and NG15; Waverunner ATOM; Quad EXPLORER and QUAD V2; ANACONDA TANK and TANK II; ULTIMATE BAIT CRUISER mini; Vega Boat mini; Carp Academy Small; CARPBOAT Mini; KINCARP V2; K-KARP TORMENTA; and SOUL Bait Solution. Revisions may differ.Package and ordering checkOne hopper door as shown. Brackets, eight fixing screws, rubber seal, electromagnet and cable are not included unless expressly stated. Compare door shape, dimensions, hinge position, hole spacing and release mechanism before ordering.InstallationDisconnect all batteries. Use the correct brackets, screws and matching hopper seal without overtightening. Check free opening, complete closing and correct release on land, then perform a careful splash and leak test before launching.
15
%
Special Offer
Motor Couplers with Oil Seals for Scavenger, Navitec and iCatcher
€21.25*
€25.00*
Delivery includes a set of two motor couplings with oil seals suitable for larger motors used in BearCreeks bait boats such as Scavenger, Navitec, and iCatcher. This component is crucial for connecting the motor to the propeller and ensuring smooth operation of the bait boat.
Compatibility note: designed for selected Scavenger V1, Navitec V2 and iCatcher V3 platform motors. Verify both shaft diameters, coupling length and oil-seal dimensions against the product photos before ordering.Motor Couplers with Oil Seals for Scavenger, Navitec and iCatcher. This BearCreeks replacement repairs the propulsion drive and transfers motor power to the propeller shaft. It is intended for Scavenger, Waverunner MK and iPilot50.Before ordering, compare the motor voltage, shaft length, coupler size and connector type with the component already fitted. Disconnect the battery before installation, protect electrical connections from moisture and complete a full dry-land function test before returning the boat to the water.Browse compatible parts for this bait boat family or view all BearCreeks bait boat parts.
15
%
Special Offer
Scavenger Bait Boat Rubber Seal
€16.15*
€19.00*
Rubber seal for the Scavenger bait boatThis BearCreeks rubber seal is designed for installation between the upper and lower hull sections of the Scavenger bait boat.Protection against water ingressMade from high-quality rubber, the seal helps prevent water from entering the hull, protects against water damage and supports reliable operation of the bait boat.
Bait boats, spare parts and GPS upgrades
Choose a bait boat for accurate bait and rig delivery, or find the right components for a boat you already own. Browse BearCreeks bait boats, model-specific spare parts, batteries, chargers and compatible GPS autopilot upgrade kits. Start with the boat platform and check the exact product variant before ordering.
Find a bait boat for your fishing
Compare bait capacity, hopper layout, rig release and navigation options across our bait boats. The Nautix series, developed with TOSLON, offers Nautix 50, 40, 20, 18 and 15 with XR310 GPS autopilot. Fishfinder equipment is optional: check whether your chosen variant includes a sonar system.
Choose parts by boat platform
Looking for a propeller, hatch, remote-control component or other replacement part? Explore bait boat parts by model. Confirm the boat version, connector and part compatibility before purchase; similar-looking parts are not always interchangeable.
Power and navigation
Browse bait boat batteries and chargers by the voltage, connector and model stated on each product page. GPS autopilot upgrade kits are available for supported platforms; check compatibility before fitting. Set the Home point before departure, and remember that navigation and return functions need valid positioning.