iCatcher / Cult Ranger / iPilot40
Skip product gallery
Featured parts for iCatcher / iPilot40
9.11
%
TOSLON XR310 Bait Boat Control & GPS Autopilot Upgrade Kit
€499.00*
€549.00*
Pre-order price shown above. Pre-order now; dispatch is planned by 31 January 2027.TOSLON XR310 Bait Boat Control & GPS Autopilot Upgrade KitTOSLON XR310 boat control and GPS autopilotControl your bait boat with one hand using the joystick and 2.8-inch colour touchscreen. XR310 combines manual steering, cruise control and GPS navigation in one handheld controller, with a control range of up to 500m.Save up to 100 waypoints, select your destination on the map and start autopilot for repeat trips to your fishing spots. Cruise control can be activated with a joystick press. If the radio signal is lost for 20 seconds, the system returns automatically to the previously set Home point.Technical specifications — XR310FeatureSpecificationRemote control rangeup to 500mRadio system2.4 GHz FHSSChannels8Display2.8″ — Capacitive colour TFT touchscreenResolution320 × 240 pxAssignable buttons6Stored waypoints100Satellite positioningGPS / BeiDou / Galileo / GLONASSController batteries2 × 14650 Li-ionController operating timeApproximately 8 hours with 1200 mAh cellsCharging connectionUSB-CCharging input5 V / 1 AMemory cardmicroSD 8–32 GBSignal-loss returnAfter 20 seconds, to the set Home pointSet Home before departure. Navigation and automatic return require valid satellite positioning. Range and battery life depend on conditions. XR310 controls the boat and autopilot; it is not a fishfinder. Sonar requires a separate fishfinder and display.Compatible international bait boat modelsThe XR310 upgrade kit is compatible with all international bait boat models listed below. BearCreeks and TOSLON combine bait boat manufacturing experience with boat-control and GPS navigation technology.Scavenger / V1 platformBearCreeks Scavenger and Scavenger Pro, iPilot50, Waverunner MK1 / MK2 / MK3 / MK4, Quad Bait Boat TRANSPORTER, ANACONDA SEA GUARD, ULTIMATE BAIT CRUISER, Vega Boat, Carp Academy, CARPBOAT, KINCARP V1, K-KARP BLACK QUEEN, Carp Royal LORD and Carponizer.Navitec / V2 platformBearCreeks Navitec and Navitec Pro, iPilot15, Waverunner ATOM, Quad Bait Boat EXPLORER, QUAD V2, ANACONDA TANK and TANK II, ULTIMATE BAIT CRUISER mini, Vega Boat mini, Carp Academy Small, CARPBOAT Mini, KINCARP V2, K-KARP TORMENTA and SOUL Bait Solution.iCatcher / V3 platformBearCreeks iCatcher and iCatcher Pro, iPilot40, CULT RANGER, ANACONDA WAVE HOPPER, SKARP S60, CARPBOAT SKARP and KINCARP V3.Carpmate / V4 platformBearCreeks Carpmate and Carpmate Pro, iPilot18, Waverunner SHUTTLE, Quad Bait Boat KOMPACT, Trend Micro, Vega Boat Micro, KINCARP V4 and Carp Royal Duke.iCatcher Mini / V6 platformBearCreeks iCatcher Mini, iPilot20, Navimate, Waverunner SPORT, Quad Bait Boat Speed GT, ANACONDA WAVE JET, CARPBOAT SMALL JET, KINCARP V6 and K-KARP ARDITO.Find your boat by its shapeCompare hull shapes and international names in our bait boat platform guide. Contact BearCreeks customer service for help choosing accessories.Bait boat platform guide
15
%
Special Offer
Lithium Batteries for iCatcher, Cult Ranger, SKARP S60 and Wave Hopper Bait Boats
€169.15*
€199.00*
Комплект литиевых аккумуляторов 12 В для совместимых прикормочных корабликовМощный сменный источник питания для увеличения времени работы совместимых корабликов, эхолотов и систем GPS/автопилота.ХарактеристикиНапряжение: 12 ВЁмкость: 20,8 А·чРазмеры: 15 × 3,4 × 8,5 см (Д × Ш × В)Гарантия на аккумулятор: 6 месяцев со дня покупкиПроверка совместимостиДля платформ BearCreeks iCatcher в литиевом исполнении и соответствующих моделей Cult Ranger, SKARP S60 и Anaconda Wave Hopper. Сверьте размеры, разъём, полярность и зарядную систему. Версии со свинцово-кислотными аккумуляторами требуют переоборудования.Зарядка и хранениеЗаряжайте только предназначенным литиевым зарядным устройством BearCreeks. Отключите питание перед установкой, защищайте соединения от влаги и подзаряжайте каждые 2–3 месяца. Перед спуском на воду проверьте функции на суше.
15
%
Special Offer
BearCreeks Scavenger, Navitec and iCatcher Bait Boat Motors
€75.65*
€89.00*
Replacement bait boat motors for Scavenger, Navitec and iCatcher (pair)This BearCreeks replacement set contains two drive motors for Scavenger, Navitec and iCatcher bait boats. It is intended for repair or maintenance when the original motors are worn, damaged or no longer operate reliably. Motor couplers with oil seals and propellers are not included and must be ordered separately.Compatible modelsBearCreeks Scavenger platformBearCreeks Navitec platformBearCreeks iCatcher platformDesigned for BearCreeks Scavenger, Navitec and iCatcher bait boats; check the motor dimensions, connectors and mounting points against your installed drive system before ordering.Check before orderingCompare the product photos, motor dimensions, voltage, connector, cable length, shaft, coupler and mounting points with the motor currently fitted. Reuse or order additional mounting parts only where suitable.Safe installationDisconnect the battery before work. Keep electrical connections dry, secure the motor and drive coupling correctly and check free rotation. Complete a full dry-land propulsion and steering test before returning the boat to the water.
15
%
Special Offer
Bait Boat Hopper Drop Electro Magnet Set
From
€21.25*
€25.00*
Bait Boat Hopper Drop Electro Magnet SetRelease magnets for the electromagnetic control of bait-boat hopper doors. This system lets compatible flaps open quickly and quietly without servo control. The set mounts at the prepared points in the hull and connects to the mainboard; no drilling or complex gluing is normally required.Choose the correct quantitySelect 4 magnets for Scavenger and other boats with two hopper doors, or 2 magnets for a single feeding chamber. Check the installed release system before ordering. Screws are not included.Compatible bait-boat platformsSelected BearCreeks Scavenger, iCatcher, Navitec, iCatcher Mini and Carpmate models, plus compatible Waverunner, KINCARP, Anaconda and Quad platforms. Compatibility varies by model and revision: compare operating voltage, connectors, mounting points, mainboard and hopper-door design with your existing parts.Installation and testingDisconnect the batteries before installation. Keep electrical connections dry and test every hopper door repeatedly on land before using the boat on water.
15
%
Special Offer
5.8GHz Antenna for Bait Boats
€13.60*
€16.00*
BearCreeks 5.8 GHz bait-boat antennaReplacement antenna that screws onto the stern fitting of compatible 5.8 GHz bait boats. Package: one antenna.Compatible platform familiesBearCreeks Navic Scavenger, Navitec, iCatcher, iCatcher Mini, Navimate and Carpmate; Waverunner MK4, Atom, Shuttle and Sport; Quad Transporter and Explorer; KINCARP V1/V2/V3/V4/V6; Anaconda Wave Hopper, Wave Jet and TANK.Before orderingConfirm 5.8 GHz radio generation, connector thread, antenna position and original shape. It is not suitable for 2.4 GHz or 40 MHz systems.FittingSwitch off the boat and handset, screw the antenna on by hand without forcing it and complete a dry-land range and control test.
20
%
Special Offer
Battery lead with DC5525 / XT60H-F Connector
From
€2.32*
€2.90*
BearCreeks black battery cableReplacement black battery lead for compatible BearCreeks bait-boat battery systems. It can be used with a suitable lead-acid or lithium-battery installation when the connector and electrical specification match.Compatibility checkCompare the plug shape, contacts and cable ends with the original cable.Verify battery type, voltage and polarity before connecting.Do not use the cable if the connector or electrical specification differs.Package and safe fittingPrice and delivery scope are for one cable. Disconnect the battery before fitting, avoid pinched or strained wiring and test the connection on dry land before using the bait boat.
15
%
Bait Boat Rubber Seal in Meter
€10.20*
€12.00*
BearCreeks bait-boat rubber seal by the metreReplacement rubber sealing profile for maintenance of compatible BearCreeks bait boats. Sold by the metre; order quantity represents the required length.Compatibility checkCompare the seal cross-section, width, height, contact surface and total length with the original part and product photos. This is not a universal seal.FittingRemove old residue, clean and dry the surface, cut carefully without stretching and check the hull or hatch for a continuous seal. Adhesive is included only if stated.
15
%
Special Offer
Bait Boat Hopper Drop Electro Magnet Set
From
€21.25*
€25.00*
Bait Boat Hopper Drop Electro Magnet SetRelease magnets for the electromagnetic control of bait-boat hopper doors. This system lets compatible flaps open quickly and quietly without servo control. The set mounts at the prepared points in the hull and connects to the mainboard; no drilling or complex gluing is normally required.Choose the correct quantitySelect 4 magnets for Scavenger and other boats with two hopper doors, or 2 magnets for a single feeding chamber. Check the installed release system before ordering. Screws are not included.Compatible bait-boat platformsSelected BearCreeks Scavenger, iCatcher, Navitec, iCatcher Mini and Carpmate models, plus compatible Waverunner, KINCARP, Anaconda and Quad platforms. Compatibility varies by model and revision: compare operating voltage, connectors, mounting points, mainboard and hopper-door design with your existing parts.Installation and testingDisconnect the batteries before installation. Keep electrical connections dry and test every hopper door repeatedly on land before using the boat on water.
15
%
Special Offer
BearCreeks Scavenger, Navitec and iCatcher Bait Boat Motors
€75.65*
€89.00*
Replacement bait boat motors for Scavenger, Navitec and iCatcher (pair)This BearCreeks replacement set contains two drive motors for Scavenger, Navitec and iCatcher bait boats. It is intended for repair or maintenance when the original motors are worn, damaged or no longer operate reliably. Motor couplers with oil seals and propellers are not included and must be ordered separately.Compatible modelsBearCreeks Scavenger platformBearCreeks Navitec platformBearCreeks iCatcher platformDesigned for BearCreeks Scavenger, Navitec and iCatcher bait boats; check the motor dimensions, connectors and mounting points against your installed drive system before ordering.Check before orderingCompare the product photos, motor dimensions, voltage, connector, cable length, shaft, coupler and mounting points with the motor currently fitted. Reuse or order additional mounting parts only where suitable.Safe installationDisconnect the battery before work. Keep electrical connections dry, secure the motor and drive coupling correctly and check free rotation. Complete a full dry-land propulsion and steering test before returning the boat to the water.
15
%
BearCreeks Bait Boat 5.8GHz 4 Channel Digital Remote Control Manufactured by FLYSKY
€92.65*
€109.00*
BearCreeks 5.8GHz 4-channel bait boat remote-control setDigital FlySky handset set for compatible 5.8GHz four-channel bait boats, with separate motor trim, forward/reverse speed control, LED control and hopper or hook-release operation.Functions and package contentsClear display shows handset and boat-battery voltageSensitive left joystick operates hopper doors and hook releaseDetented right joystick supports steady forward travelSupplied with matching receiver and antennaCompatibility and safe operationFor selected BearCreeks Navitec, Carpmate, iCatcher, iCatcher Mini and Navimate platforms, plus compatible 5.8GHz four-channel boats. Compare receiver generation, connectors, antenna and channel functions before ordering. Do not hold the left joystick continuously: prolonged activation can overheat the release magnets and damage wiring. Return the right joystick to neutral to stop the boat.
iCatcher Bait Boat Rubber Seals for Power Sockets
€5.00*
Rubber seals for iCatcher power socketsThis set contains two BearCreeks rubber seals for the power sockets of compatible bait boats. The seals help protect the charging connections from splash water, dirt and wear and support a secure fit around both sockets.Compatible bait boat platformsBearCreeks iCatcher and iCatcher ProiPilot40 and NG40CULT RANGERANACONDA WAVE HOPPERSKARP S60 and CARPBOAT SKARPKINCARP V3These names refer to the same base boat platform in different markets.Check before orderingCompatibility depends on the socket dimensions. Compare the product photos, seal profile, diameter and installation position with the parts currently fitted to your boat.Safe installationDisconnect the battery before fitting. Seat both seals without stretching or pinching them, keep electrical contacts dry and complete a full dry-land charging and function test before returning the boat to the water.
15
%
Special Offer
Motor Couplers with Oil Seals for Scavenger, Navitec and iCatcher
€21.25*
€25.00*
Delivery includes a set of two motor couplings with oil seals suitable for larger motors used in BearCreeks bait boats such as Scavenger, Navitec, and iCatcher. This component is crucial for connecting the motor to the propeller and ensuring smooth operation of the bait boat.
Compatibility note: designed for selected Scavenger V1, Navitec V2 and iCatcher V3 platform motors. Verify both shaft diameters, coupling length and oil-seal dimensions against the product photos before ordering.Motor Couplers with Oil Seals for Scavenger, Navitec and iCatcher. This BearCreeks replacement repairs the propulsion drive and transfers motor power to the propeller shaft. It is intended for Scavenger, Waverunner MK and iPilot50.Before ordering, compare the motor voltage, shaft length, coupler size and connector type with the component already fitted. Disconnect the battery before installation, protect electrical connections from moisture and complete a full dry-land function test before returning the boat to the water.Browse compatible parts for this bait boat family or view all BearCreeks bait boat parts.
15
%
Special Offer
Bait Boat Sonar Box with Rubber Seal
€5.10*
€6.00*
BearCreeks sonar box with rubber washerReplacement empty sonar housing for the fishfinder recess in compatible BearCreeks bait boats. Supplied with one rubber sealing washer.Package contents1 empty sonar box1 rubber washerNo transducer or electronics includedCompatibility checkUsed across compatible iCatcher/iPilot40, Scavenger/iPilot50, Navitec/iPilot15, Carpmate/iPilot18 and iCatcher Mini/iPilot20 platforms. Compare the recess, box shape, dimensions and sealing surface with the original part.FittingClean the recess, seat the washer evenly and check the installation for gaps. Keep electronics dry and test on land before use.
Bait Boat Motor Propeller for iCatcher, Scavenger and Navitec
€12.00*
Pair of replacement propellers for compatible bait boatsThese durable BearCreeks ABS propellers fit the motor shafts of compatible bait boats and restore propulsion and steering response. The package contains one matched pair.Compatible base platformsBearCreeks iCatcher and iCatcher ProiPilot40 and NG40CULT RANGERANACONDA WAVE HOPPERSKARP S60 and CARPBOAT SKARPKINCARP V3These names refer to the same base platform in different markets.Material and installationThe ABS propellers attach to compatible motor shafts using suitable retaining screws. Screws are not listed as included in the package.Check before orderingCompare the product photos, shaft diameter, blade direction, propeller orientation and retaining-screw type with the installed parts. Disconnect the battery and complete a full dry-land function test before launching the boat.
15
%
Special Offer
Bait Boat Toggle Switch with Waterproof Rubber Cover and Washer
€7.65*
€9.00*
Bait boat toggle switch with waterproof coverReplacement toggle switch supplied with a waterproof rubber cover and washer.Check compatibility before orderingSwitch functionTerminal layoutOperating voltageMounting threadPanel-hole diameter
15
%
Washer for hook release magnet
€1.70*
€2.00*
Шайба магнита механизма сброса крючкаСменная шайба для установки совместимого магнита механизма сброса крючка BearCreeks.Проверка перед заказомШайба не универсальна. Сверьте модель магнита, наружный и внутренний диаметр, толщину, материал и положение с оригинальной деталью и фото товара.КомплектацияПредложение относится к показанной шайбе. Магнит, кабель, винты и другие детали входят только при прямом указании.Установка и проверкаОтключите аккумуляторы, установите шайбу в исходной последовательности и не допускайте перетяжки или деформации. Защищайте соединения от влаги и несколько раз проверьте сброс крючка на суше.
14.95
%
Special Offer
40MHz Bait Boat Antenna
€8.42*
€9.90*
This 40MHz antenna is designed for use with Quad, BaitCruiser, Shuttle, Atom and Waverunner Bait Boats that feature a telescopic transmitter antenna. If your boat falls into any of these categories and includes a telesopic transmitter aerial, the antenna listed here is compatible with your boat.
Compatibility note: for selected 40MHz radio systems only; it is not compatible with 2.4GHz or 5.8GHz equipment. Verify connector, thread and receiver generation.
15
%
Special Offer
Bait Boat 5.8GHz Remote Control Receiver
€29.75*
€35.00*
5.8GHz remote-control receiver for compatible bait boatsThis BearCreeks replacement receiver restores the radio link between the handheld transmitter and the electronics of compatible non-GPS bait boats using the matching 5.8GHz platform.Suitable forReplacing a damaged or unreliable receiverRepairing intermittent signal or control faultsServicing a compatible 5.8GHz remote-control systemCheck before orderingThis receiver is not universal. Compare the boat model, radio generation, channel layout, antenna connection, plugs and original part markings. The transmitter and receiver must use the same platform.Installation and pairingDisconnect the boat battery before installation.Protect connectors and electronics from moisture.Pairing with the transmitter may be required after replacement.Complete a full dry-land function test before returning the boat to the water.Package contents: one 5.8GHz receiver. Mounting bracket and antenna are available separately where required.
Special Offer
iCatcher Bait Boat New Jet Like Weed Guards
€33.00*
New jet-profile weed guards for iCatcher bait boatsThis BearCreeks set contains a pair of moulded ABS weed guards for the propulsion area of a compatible bait boat. The streamlined jet-style design helps reduce contact between the propellers and weeds, leaves or loose debris while retaining water flow.Compatible platformsBearCreeks iCatcher and iCatcher ProiPilot40 and NG40Cult Ranger, Anaconda Wave Hopper, SKARP S60 / Carpboat SKARP and Kincarp V3This is the newer jet-profile version; do not confuse it with the separately listed old-style guard.Check before orderingThe guards are not universal. Compare hull generation, fixing holes, guard shape, propeller position and clearance with the installed parts and product photos. Product number: V3.WeedGuard.Installation and useDisconnect the battery before installation. Fit both guards without forcing the hull and confirm that each propeller turns freely without contact. Test the motors briefly on dry land, then check the guards regularly and remove trapped vegetation after use.
15
%
BearCreeks Bait Boat GPS 5.8GHz 4 Channel Digital Remote Control Manufactured by FLYSKY
€101.15*
€119.00*
BearCreeks GPS 5.8GHz 4-channel remote-control setDigital FlySky handset set for compatible GPS-enabled 5.8GHz four-channel bait boats, combining manual control with programmable autopilot navigation.Functions and package contentsStores up to 21 fishing spots and drives to saved positions automaticallyControls motor trim, forward/reverse speed, LEDs, hopper doors and hook releaseDisplay shows handset and boat-battery voltageMatching receiver and antenna includedCompatibility and safe operationFor selected BearCreeks Navitec Pro, Carpmate Pro, iCatcher Pro, KINCARP V2/V3/V4 and Anaconda Wave Hopper platforms. Not suitable for V6 models, Navimate or iCatcher Mini. Verify GPS mainboard generation, receiver, connectors, antenna and pairing before ordering. Do not hold the left joystick continuously because release magnets can overheat and damage wiring; return the right joystick to neutral to stop.
15
%
Special Offer
BearCreeks 5.8G Bait Boats GPS Module
€24.65*
€29.00*
BearCreeks 5.8 GHz GPS moduleReplacement GPS module for compatible BearCreeks bait boats with autopilot. Package: one module; cables, antenna and remote are included only when stated.Compatibility checkFor iCatcher/iPilot40, Scavenger/iPilot50, Navitec/iPilot15 and Carpmate/iPilot18 platform families. Match the boat, GPS generation, 5.8 GHz controller, plugs and mounting points.InstallationDisconnect batteries, protect electronics from moisture and test GPS, steering and return functions on land before use.
Special Offer
5.8GHz Bait Boat Autopilot Upgrade Kit
€399.00*
5.8GHz Bait Boat Autopilot Upgrade KitThe BearCreeks 5.8GHz bait boat GPS autopilot upgrade kit is a game-changer for fishing enthusiasts. Not only does it offer advanced features such as automatic navigation and autopilot, but it also includes a spot-saving feature that allows you to save your favorite fishing spots and return to them with ease. In addition to its impressive capabilities, the autopilot upgrade kit also features a fail-safe function that ensures your boat returns home automatically in case of weak signal or low power.Plus, the kit shows the distance from the home spot, so you always know how far you are from your starting point. Overall, the BearCreeks 5.8G bait boat autopilot upgrade kit is an essential tool for any serious angler. With its advanced technology and fail-safe features, you can fish with confidence and efficiency, knowing that your bait boat will always navigate accurately and return home safely.BearCreeks 5.8G bait boat GPS upgrade kit is compatible with following bait boat models:Compatible model kitsGPS50BearCreeks Scavenger, Waverunner MK1/MK2/MK3/M4, Quad Bait Boat, TRANSPORTER, ANACONDA SEA GUARD, ULTIMATE BAIT CRUISER, Vega Boat, Carp Academy, CARPBOAT, KINCARP V1, K-KARP BLACK QUEEN Carp Royal LORD CarponizerGPS40BearCreeks iCatcher , CULT RANGER ANACONDA WAVE HOPPER, SKARP S60, CARPBOAT SKARP, KINCARP V3GPS18BearCreeks Carpmate, Waverunner SHUTTLE, Quad Bait Boat KOMPACT, Trend Micro, Vega Boat Micro, KINCARP V4, Carp Royal DukeGPS15BearCreeks Navitec, Waverunner ATOM, Quad Bait Boat EXPLORER, QUAD V2, ANACONDA TANK, TANK II, ULTIMATE BAIT CRUISER mini, Vega Boat mini, Carp Academy Small, CARPBOAT Mini, KINCARP V2, K-KARP TORMENTA SOUL Bait Solution Compatibility note: this 5.8GHz GPS upgrade kit is available for selected boat platforms and is not universal. Verify boat model, mainboard version, wiring, connectors, antenna and installation requirements before ordering.
Variants from €313.65*
15
%
Special Offer
iCatcher Bait Boat Screws Set for Upper and Lower Shell
€10.20*
€12.00*
Stainless-steel screw set for the iCatcher upper and lower hullThis BearCreeks replacement set securely joins the upper and lower hull sections of a compatible bait boat.Compatible platform namesBearCreeks iCatcher and iCatcher Pro, iPilot40 and NG40, CULT RANGER, ANACONDA WAVE HOPPER, SKARP S60, CARPBOAT SKARP and KINCARP V3. These names refer to the same base platform in different markets.Material and useThe set consists of stainless-steel hull screws. Hull sections, seals and other components are not included.Check before installationCompare the hull generation, screw quantity, dimensions, thread and head type with the original hardware. Disconnect the battery and tighten the screws gradually and evenly without damaging the hull.
15
%
Special Offer
Bait Boat GPS Remote Control Receiver 5.8GHz
€33.15*
€39.00*
BearCreeks 5.8 GHz GPS remote-control receiverReplacement receiver for compatible BearCreeks bait boats with GPS and a 5.8 GHz control system.PackageIncludes one GPS receiver. Mounting bracket and antenna are optional unless expressly listed.Compatibility checkConfirm boat platform, GPS generation, transmitter pairing, channel configuration, antenna connection, plugs and mounting position. Not for non-GPS systems.InstallationDisconnect batteries, protect connections from moisture, mount securely and perform steering, range and GPS tests on land.
Special Offer
Bait Boat Bait Hopper Electromagnets
€25.00*
Electromagnets for bait-boat hopper doorsThis replacement electromagnet set controls the opening of compatible bait-boat hopper flaps. When activated, the magnets release the doors quickly and quietly so the bait can be deposited at the selected spot.Designed for electromagnetic release systemsThe parts are intended for bait boats that use an electromagnetic hopper-door mechanism. They are not a direct replacement for servo-operated release systems. Installation normally uses the existing mounting points and wiring, without soldering or gluing when the boat has the matching connections.Compatibility check before orderingCheck the boat model and generation, number and shape of the magnets, operating voltage, plug type, polarity, cable length and mounting dimensions against the original parts and the product image. The set is not universal; the exact quantity and any cables or fasteners supplied are only those shown or expressly listed.Safe installationDisconnect all batteries before fitting. Keep plugs and electronics dry, route cables away from moving parts and never leave the release magnets energised continuously. After installation, test both hopper doors on dry land before using the boat on water.
iCatcher Bait Boat Rubber Seal for Battery Cover
€3.00*
Rubber seal for the iCatcher battery coverThis replacement seal fits between the battery-compartment cover and the hull. It helps reduce splash-water entry and supports a secure cover fit.Package contentsThe package contains one replacement rubber seal. The battery cover and other components are not included unless expressly stated.Compatible base platformFor BearCreeks iCatcher and iCatcher Pro, iPilot40 and NG40, Cult Ranger, Anaconda Wave Hopper, SKARP S60, Carpboat SKARP and KINCARP V3 platform boats.Check and install safelyBefore ordering, compare the seal profile, dimensions, battery-cover shape, installation position and product photos. Disconnect the battery, clean and dry the mating surfaces, do not stretch the seal, protect electrical connections from moisture and perform a dry-land function and splash-resistance check before use.
15
%
Special Offer
iCatcher Pro Bait Boat Mainboard with GPS function
€92.65*
€109.00*
GPS mainboard for iCatcher Pro bait boatsThis replacement mainboard provides the boat’s central control and GPS-related connections. It mounts in the centre of the lower hull using two screws, without drilling or adhesive.Package and installationThe package contains one GPS mainboard. Screws, cables, GPS antenna and other components are included only when expressly stated.Compatible base platformFor compatible BearCreeks iCatcher/iCatcher Pro, iPilot40/NG40, Cult Ranger, Anaconda Wave Hopper, SKARP S60, Carpboat SKARP and KINCARP V3 platform boats. This board is not universal.Check before fittingCompare board version, operating voltage, every connector and pin layout, GPS system generation, mounting points and product photos. Disconnect the battery, protect electronics from static and moisture, reconnect cables exactly and complete a full dry-land function and GPS test before use.
15
%
Special Offer
Replacement Rechargeable Lithium Battery for iPilot and Navison Bait Boat Remote Control Handset
€50.15*
€59.00*
Rechargeable battery for iPilot and Navison handsetsKeep your compatible BearCreeks remote-control handset ready for use with this rechargeable lithium battery.Key benefitsRechargeable lithium battery for a compatible remote handsetUp to 24 hours of operating timeCompatibilityFits selected BearCreeks iPilot and Navison remote-control handsets.Check before orderingVerify the handset generation, voltage, battery dimensions, polarity and connector before ordering.
Parts for iCatcher / iPilot40 bait boats
Find replacement parts for this bait boat family, sold under names including iCatcher, iCatcher Pro, iPilot40, Cult Ranger. Names vary between markets, and parts from different production generations are not automatically interchangeable.
Before ordering, compare the part number, dimensions, mounting points and electrical connectors with the component fitted to your boat. If unsure, send our support team a photo of the original part.