Scavenger / Waverunner MK / iPilot50
Skip product gallery
Featured parts for Scavenger / iPilot50
9.11
%
TOSLON XR310 Bait Boat Control & GPS Autopilot Upgrade Kit
€499.00*
€549.00*
Pre-order price shown above. Pre-order now; dispatch is planned by 31 January 2027.TOSLON XR310 Bait Boat Control & GPS Autopilot Upgrade KitTOSLON XR310 boat control and GPS autopilotControl your bait boat with one hand using the joystick and 2.8-inch colour touchscreen. XR310 combines manual steering, cruise control and GPS navigation in one handheld controller, with a control range of up to 500m.Save up to 100 waypoints, select your destination on the map and start autopilot for repeat trips to your fishing spots. Cruise control can be activated with a joystick press. If the radio signal is lost for 20 seconds, the system returns automatically to the previously set Home point.Technical specifications — XR310FeatureSpecificationRemote control rangeup to 500mRadio system2.4 GHz FHSSChannels8Display2.8″ — Capacitive colour TFT touchscreenResolution320 × 240 pxAssignable buttons6Stored waypoints100Satellite positioningGPS / BeiDou / Galileo / GLONASSController batteries2 × 14650 Li-ionController operating timeApproximately 8 hours with 1200 mAh cellsCharging connectionUSB-CCharging input5 V / 1 AMemory cardmicroSD 8–32 GBSignal-loss returnAfter 20 seconds, to the set Home pointSet Home before departure. Navigation and automatic return require valid satellite positioning. Range and battery life depend on conditions. XR310 controls the boat and autopilot; it is not a fishfinder. Sonar requires a separate fishfinder and display.Compatible international bait boat modelsThe XR310 upgrade kit is compatible with all international bait boat models listed below. BearCreeks and TOSLON combine bait boat manufacturing experience with boat-control and GPS navigation technology.Scavenger / V1 platformBearCreeks Scavenger and Scavenger Pro, iPilot50, Waverunner MK1 / MK2 / MK3 / MK4, Quad Bait Boat TRANSPORTER, ANACONDA SEA GUARD, ULTIMATE BAIT CRUISER, Vega Boat, Carp Academy, CARPBOAT, KINCARP V1, K-KARP BLACK QUEEN, Carp Royal LORD and Carponizer.Navitec / V2 platformBearCreeks Navitec and Navitec Pro, iPilot15, Waverunner ATOM, Quad Bait Boat EXPLORER, QUAD V2, ANACONDA TANK and TANK II, ULTIMATE BAIT CRUISER mini, Vega Boat mini, Carp Academy Small, CARPBOAT Mini, KINCARP V2, K-KARP TORMENTA and SOUL Bait Solution.iCatcher / V3 platformBearCreeks iCatcher and iCatcher Pro, iPilot40, CULT RANGER, ANACONDA WAVE HOPPER, SKARP S60, CARPBOAT SKARP and KINCARP V3.Carpmate / V4 platformBearCreeks Carpmate and Carpmate Pro, iPilot18, Waverunner SHUTTLE, Quad Bait Boat KOMPACT, Trend Micro, Vega Boat Micro, KINCARP V4 and Carp Royal Duke.iCatcher Mini / V6 platformBearCreeks iCatcher Mini, iPilot20, Navimate, Waverunner SPORT, Quad Bait Boat Speed GT, ANACONDA WAVE JET, CARPBOAT SMALL JET, KINCARP V6 and K-KARP ARDITO.Find your boat by its shapeCompare hull shapes and international names in our bait boat platform guide. Contact BearCreeks customer service for help choosing accessories.Bait boat platform guide
15
%
Special Offer
Lithium Battery for BearCreeks Scavenger and Navitec bait boat 23,4Ah
€182.75*
€215.00*
BearCreeks 12V 23.4Ah lithium battery for bait boatsHigh-capacity lithium battery for compatible Scavenger, Navitec and related bait-boat platforms. Depending on load, speed, weather and operating conditions, it can provide up to six hours of runtime.Technical dataVoltage: 12VCapacity: 23.4AhDimensions: 14.3 × 6.4 × 9.8cmRuntime: up to 6 hours under suitable conditionsCompatible platformsScavenger/Scavenger Pro, Navitec/Navitec Pro, Waverunner Atom and MK2/3/4, Anaconda Sea Guard and Tank II, selected V1/V2 boats, Carponizer, Carpboat, Bait Cruiser/Mini and Quad Transporter/Explorer. Always compare the installed connector and battery compartment.Charging and storageUse only the specified BearCreeks lithium charger (LitBatCh). This battery is not a direct replacement for lead-acid systems; conversion may require compatible software and service work. Recharge every two to three months during storage and observe the bait-boat manual.
15
%
Special Offer
BearCreeks Scavenger, Navitec and iCatcher Bait Boat Motors
€75.65*
€89.00*
Replacement bait boat motors for Scavenger, Navitec and iCatcher (pair)This BearCreeks replacement set contains two drive motors for Scavenger, Navitec and iCatcher bait boats. It is intended for repair or maintenance when the original motors are worn, damaged or no longer operate reliably. Motor couplers with oil seals and propellers are not included and must be ordered separately.Compatible modelsBearCreeks Scavenger platformBearCreeks Navitec platformBearCreeks iCatcher platformDesigned for BearCreeks Scavenger, Navitec and iCatcher bait boats; check the motor dimensions, connectors and mounting points against your installed drive system before ordering.Check before orderingCompare the product photos, motor dimensions, voltage, connector, cable length, shaft, coupler and mounting points with the motor currently fitted. Reuse or order additional mounting parts only where suitable.Safe installationDisconnect the battery before work. Keep electrical connections dry, secure the motor and drive coupling correctly and check free rotation. Complete a full dry-land propulsion and steering test before returning the boat to the water.
15
%
Special Offer
Bait Boat Hopper Drop Electro Magnet Set
From
€21.25*
€25.00*
Bait Boat Hopper Drop Electro Magnet SetRelease magnets for the electromagnetic control of bait-boat hopper doors. This system lets compatible flaps open quickly and quietly without servo control. The set mounts at the prepared points in the hull and connects to the mainboard; no drilling or complex gluing is normally required.Choose the correct quantitySelect 4 magnets for Scavenger and other boats with two hopper doors, or 2 magnets for a single feeding chamber. Check the installed release system before ordering. Screws are not included.Compatible bait-boat platformsSelected BearCreeks Scavenger, iCatcher, Navitec, iCatcher Mini and Carpmate models, plus compatible Waverunner, KINCARP, Anaconda and Quad platforms. Compatibility varies by model and revision: compare operating voltage, connectors, mounting points, mainboard and hopper-door design with your existing parts.Installation and testingDisconnect the batteries before installation. Keep electrical connections dry and test every hopper door repeatedly on land before using the boat on water.
15
%
Special Offer
5.8GHz Antenna for Bait Boats
€13.60*
€16.00*
BearCreeks 5.8 GHz bait-boat antennaReplacement antenna that screws onto the stern fitting of compatible 5.8 GHz bait boats. Package: one antenna.Compatible platform familiesBearCreeks Navic Scavenger, Navitec, iCatcher, iCatcher Mini, Navimate and Carpmate; Waverunner MK4, Atom, Shuttle and Sport; Quad Transporter and Explorer; KINCARP V1/V2/V3/V4/V6; Anaconda Wave Hopper, Wave Jet and TANK.Before orderingConfirm 5.8 GHz radio generation, connector thread, antenna position and original shape. It is not suitable for 2.4 GHz or 40 MHz systems.FittingSwitch off the boat and handset, screw the antenna on by hand without forcing it and complete a dry-land range and control test.
20
%
Special Offer
Battery lead with DC5525 / XT60H-F Connector
From
€2.32*
€2.90*
BearCreeks black battery cableReplacement black battery lead for compatible BearCreeks bait-boat battery systems. It can be used with a suitable lead-acid or lithium-battery installation when the connector and electrical specification match.Compatibility checkCompare the plug shape, contacts and cable ends with the original cable.Verify battery type, voltage and polarity before connecting.Do not use the cable if the connector or electrical specification differs.Package and safe fittingPrice and delivery scope are for one cable. Disconnect the battery before fitting, avoid pinched or strained wiring and test the connection on dry land before using the bait boat.
15
%
Bait Boat Rubber Seal in Meter
€10.20*
€12.00*
BearCreeks bait-boat rubber seal by the metreReplacement rubber sealing profile for maintenance of compatible BearCreeks bait boats. Sold by the metre; order quantity represents the required length.Compatibility checkCompare the seal cross-section, width, height, contact surface and total length with the original part and product photos. This is not a universal seal.FittingRemove old residue, clean and dry the surface, cut carefully without stretching and check the hull or hatch for a continuous seal. Adhesive is included only if stated.
15
%
Special Offer
Bait Boat Hopper Drop Electro Magnet Set
From
€21.25*
€25.00*
Bait Boat Hopper Drop Electro Magnet SetRelease magnets for the electromagnetic control of bait-boat hopper doors. This system lets compatible flaps open quickly and quietly without servo control. The set mounts at the prepared points in the hull and connects to the mainboard; no drilling or complex gluing is normally required.Choose the correct quantitySelect 4 magnets for Scavenger and other boats with two hopper doors, or 2 magnets for a single feeding chamber. Check the installed release system before ordering. Screws are not included.Compatible bait-boat platformsSelected BearCreeks Scavenger, iCatcher, Navitec, iCatcher Mini and Carpmate models, plus compatible Waverunner, KINCARP, Anaconda and Quad platforms. Compatibility varies by model and revision: compare operating voltage, connectors, mounting points, mainboard and hopper-door design with your existing parts.Installation and testingDisconnect the batteries before installation. Keep electrical connections dry and test every hopper door repeatedly on land before using the boat on water.
15
%
Special Offer
Scavenger Bait Boat Hopper Rubber Seal
€18.70*
€22.00*
This hopper rubber seal fits between the bait boat hull and the hopper door, preventing water from entering the boat during use. The seal is easy to install and provides an extra layer of protection for your bait boat.
International model names for this base platform: BearCreeks Scavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1, MK2, MK3 and MK4; Quad Bait Boat TRANSPORTER; ANACONDA SEA GUARD; ULTIMATE BAIT CRUISER; Vega Boat; Carp Academy; CARPBOAT; KINCARP V1; K-KARP BLACK QUEEN; Carp Royal LORD; Carponizer. These names refer to the same base boat platform in different markets. Compatibility depends on the hopper profile, seal dimensions and model generation. Compare the product photos before ordering.
15
%
Special Offer
Lithium Battery for BearCreeks Scavenger and Navitec bait boat 23,4Ah
€182.75*
€215.00*
BearCreeks 12V 23.4Ah lithium battery for bait boatsHigh-capacity lithium battery for compatible Scavenger, Navitec and related bait-boat platforms. Depending on load, speed, weather and operating conditions, it can provide up to six hours of runtime.Technical dataVoltage: 12VCapacity: 23.4AhDimensions: 14.3 × 6.4 × 9.8cmRuntime: up to 6 hours under suitable conditionsCompatible platformsScavenger/Scavenger Pro, Navitec/Navitec Pro, Waverunner Atom and MK2/3/4, Anaconda Sea Guard and Tank II, selected V1/V2 boats, Carponizer, Carpboat, Bait Cruiser/Mini and Quad Transporter/Explorer. Always compare the installed connector and battery compartment.Charging and storageUse only the specified BearCreeks lithium charger (LitBatCh). This battery is not a direct replacement for lead-acid systems; conversion may require compatible software and service work. Recharge every two to three months during storage and observe the bait-boat manual.
15
%
Special Offer
Propellers for Scavenger, iCatcher and Navitec Bait Boats
€10.20*
€12.00*
Replacement propellers for BearCreeks Scavenger bait boatsThese durable ABS propellers restore efficient propulsion and manoeuvring when the original blades are worn, damaged or lost. They attach to the motor shafts with the appropriate fixing screws.Compatible base-platform namesBearCreeks Scavenger and Scavenger ProiPilot50 and NG50Waverunner MK1–MK4Quad Bait Boat TRANSPORTER and ANACONDA SEA GUARDULTIMATE BAIT CRUISER, Vega Boat, Carp Academy and CARPBOATKINCARP V1, K-KARP BLACK QUEEN, Carp Royal LORD and CarponizerCheck before orderingPropellers are not universal. Compare the product photos and verify shaft diameter, fixing method, propeller size and left/right rotation with the parts already fitted.Installation and safetyDisconnect the battery before installation. Fit each propeller in the correct position, tighten the screws securely without overtightening and check that both propellers rotate freely. Complete a low-power dry-land check before returning the boat to the water.
15
%
Special Offer
Advanced Jet-Like Weed Guard for Scavenger Bait Boat
€29.75*
€35.00*
Jet-style weed guards for Scavenger bait boatsUpgrade the compatible bait boat platform with the newer BearCreeks jet-style propeller guards. When used with the required longer-shaft motors, their streamlined design can increase boat speed by up to 50% while helping to reduce weed contact and support quieter, more efficient running.Compatible platform namesScavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1–MK4; Quad Bait Boat Transporter; Anaconda Sea Guard; Ultimate Bait Cruiser; Vega Boat; Carp Academy; Carpboat; Kincarp V1; K-Karp Black Queen; Carp Royal Lord; Carponizer.Important compatibility checkThis is the newer jet-style version for longer-shaft motors. Compare hull generation, guard shape, mounting points and product photos before ordering.InstallationDisconnect the battery, install both guards securely and perform a dry-land clearance and rotation test before returning the boat to the water.
15
%
Special Offer
BearCreeks Scavenger Bait Boat Hull Screws (Male and Female) 33 Pairs
€24.65*
€29.00*
Male and female hull screw set for Scavenger bait boatsBearCreeks replacement fastener set for securely joining the upper and lower hull sections of the compatible bait boat platform.Compatible platform namesScavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1–MK4; Quad Bait Boat Transporter; Anaconda Sea Guard; Ultimate Bait Cruiser; Vega Boat; Carp Academy; Carpboat; Kincarp V1; K-Karp Black Queen; Carp Royal Lord; Carponizer.Package contentsMale and female hull screws only; no additional components or accessories.Check before orderingCompare product number V1HULLSCREWS, hull generation, thread, screw dimensions, positions and product photos with the fitted parts.InstallationAlign the hull halves correctly, start every fastener by hand and tighten evenly without overtightening or damaging the seal.
15
%
Special Offer
BearCreeks Scavenger, Navitec and iCatcher Bait Boat Motors
€75.65*
€89.00*
Replacement bait boat motors for Scavenger, Navitec and iCatcher (pair)This BearCreeks replacement set contains two drive motors for Scavenger, Navitec and iCatcher bait boats. It is intended for repair or maintenance when the original motors are worn, damaged or no longer operate reliably. Motor couplers with oil seals and propellers are not included and must be ordered separately.Compatible modelsBearCreeks Scavenger platformBearCreeks Navitec platformBearCreeks iCatcher platformDesigned for BearCreeks Scavenger, Navitec and iCatcher bait boats; check the motor dimensions, connectors and mounting points against your installed drive system before ordering.Check before orderingCompare the product photos, motor dimensions, voltage, connector, cable length, shaft, coupler and mounting points with the motor currently fitted. Reuse or order additional mounting parts only where suitable.Safe installationDisconnect the battery before work. Keep electrical connections dry, secure the motor and drive coupling correctly and check free rotation. Complete a full dry-land propulsion and steering test before returning the boat to the water.
15
%
Special Offer
Scavenger Bait Boat Mainboard
€92.65*
€109.00*
The BearCreeks Scavenger Baitboat Mainboard is a necessary component to control all important functions of your bait boat. Designed to be fixed in the top hull, installation is easy and hassle-free with pre-existing holes. Please note that if you have a Scavenger bait boat with GPS, you will need to order the V1.PCB-MainboardGPS instead.
International model names for this base platform: BearCreeks Scavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1, MK2, MK3 and MK4; Quad Bait Boat TRANSPORTER; ANACONDA SEA GUARD; ULTIMATE BAIT CRUISER; Vega Boat; Carp Academy; CARPBOAT; KINCARP V1; K-KARP BLACK QUEEN; Carp Royal LORD; Carponizer. These names refer to the same base boat platform in different markets. This mainboard is not universal. Verify voltage, system generation and every connector. Compare the product photos before ordering.
15
%
Special Offer
Motor Couplers with Oil Seals for Scavenger, Navitec and iCatcher
€21.25*
€25.00*
Delivery includes a set of two motor couplings with oil seals suitable for larger motors used in BearCreeks bait boats such as Scavenger, Navitec, and iCatcher. This component is crucial for connecting the motor to the propeller and ensuring smooth operation of the bait boat.
Compatibility note: designed for selected Scavenger V1, Navitec V2 and iCatcher V3 platform motors. Verify both shaft diameters, coupling length and oil-seal dimensions against the product photos before ordering.Motor Couplers with Oil Seals for Scavenger, Navitec and iCatcher. This BearCreeks replacement repairs the propulsion drive and transfers motor power to the propeller shaft. It is intended for Scavenger, Waverunner MK and iPilot50.Before ordering, compare the motor voltage, shaft length, coupler size and connector type with the component already fitted. Disconnect the battery before installation, protect electrical connections from moisture and complete a full dry-land function test before returning the boat to the water.Browse compatible parts for this bait boat family or view all BearCreeks bait boat parts.
15
%
Special Offer
Bait Boat Sonar Box with Rubber Seal
€5.10*
€6.00*
BearCreeks sonar box with rubber washerReplacement empty sonar housing for the fishfinder recess in compatible BearCreeks bait boats. Supplied with one rubber sealing washer.Package contents1 empty sonar box1 rubber washerNo transducer or electronics includedCompatibility checkUsed across compatible iCatcher/iPilot40, Scavenger/iPilot50, Navitec/iPilot15, Carpmate/iPilot18 and iCatcher Mini/iPilot20 platforms. Compare the recess, box shape, dimensions and sealing surface with the original part.FittingClean the recess, seat the washer evenly and check the installation for gaps. Keep electronics dry and test on land before use.
15
%
Special Offer
Bait Boat Toggle Switch with Waterproof Rubber Cover and Washer
€7.65*
€9.00*
Bait boat toggle switch with waterproof coverReplacement toggle switch supplied with a waterproof rubber cover and washer.Check compatibility before orderingSwitch functionTerminal layoutOperating voltageMounting threadPanel-hole diameter
15
%
Washer for hook release magnet
€1.70*
€2.00*
Шайба магнита механизма сброса крючкаСменная шайба для установки совместимого магнита механизма сброса крючка BearCreeks.Проверка перед заказомШайба не универсальна. Сверьте модель магнита, наружный и внутренний диаметр, толщину, материал и положение с оригинальной деталью и фото товара.КомплектацияПредложение относится к показанной шайбе. Магнит, кабель, винты и другие детали входят только при прямом указании.Установка и проверкаОтключите аккумуляторы, установите шайбу в исходной последовательности и не допускайте перетяжки или деформации. Защищайте соединения от влаги и несколько раз проверьте сброс крючка на суше.
14.95
%
Special Offer
40MHz Bait Boat Antenna
€8.42*
€9.90*
This 40MHz antenna is designed for use with Quad, BaitCruiser, Shuttle, Atom and Waverunner Bait Boats that feature a telescopic transmitter antenna. If your boat falls into any of these categories and includes a telesopic transmitter aerial, the antenna listed here is compatible with your boat.
Compatibility note: for selected 40MHz radio systems only; it is not compatible with 2.4GHz or 5.8GHz equipment. Verify connector, thread and receiver generation.
15
%
Scavenger Bait Boat LED Lights Rubber Set
€5.10*
€6.00*
LED light rubber seal set for Scavenger-platform bait boatsThis replacement rubber set fits around the compatible LED light openings and helps reduce water ingress into the bait boat hull. Correct installation supports a secure fit but does not make the boat waterproof.Compatible platformFor BearCreeks Scavenger and Scavenger Pro; iPilot50 and NG50; Waverunner MK1–MK4; Quad TRANSPORTER; ANACONDA SEA GUARD; ULTIMATE BAIT CRUISER; Vega Boat; Carp Academy; CARPBOAT; KINCARP V1; K-KARP BLACK QUEEN; Carp Royal LORD; and Carponizer.Check before orderingCompare LED shape and diameter, seal profile and dimensions, installation position and hull generation with the original parts and product photos. Platform revisions can use different front, side or rear LED sizes.Installation and careDisconnect the batteries, remove dirt and old seal residue and fit each rubber without twisting or stretching it. Reconnect only after all areas are dry. Test every light on land and perform a careful splash and leak check before launching.
15
%
Special Offer
Bait Boat 5.8GHz Remote Control Receiver
€29.75*
€35.00*
5.8GHz remote-control receiver for compatible bait boatsThis BearCreeks replacement receiver restores the radio link between the handheld transmitter and the electronics of compatible non-GPS bait boats using the matching 5.8GHz platform.Suitable forReplacing a damaged or unreliable receiverRepairing intermittent signal or control faultsServicing a compatible 5.8GHz remote-control systemCheck before orderingThis receiver is not universal. Compare the boat model, radio generation, channel layout, antenna connection, plugs and original part markings. The transmitter and receiver must use the same platform.Installation and pairingDisconnect the boat battery before installation.Protect connectors and electronics from moisture.Pairing with the transmitter may be required after replacement.Complete a full dry-land function test before returning the boat to the water.Package contents: one 5.8GHz receiver. Mounting bracket and antenna are available separately where required.
15
%
Special Offer
BearCreeks Scavenger Battery Cover
€10.20*
€12.00*
Battery Cover for Scavenger Bait BoatsThis BearCreeks replacement cover closes the battery compartment on the matching upper hull and helps reduce splash water and moisture entering the boat. It does not make the bait boat completely waterproof.CompatibilityFor the shared platform used by BearCreeks Scavenger and Scavenger Pro, iPilot50 and NG50, Waverunner MK1–MK4, Quad TRANSPORTER, ANACONDA SEA GUARD, ULTIMATE BAIT CRUISER, Vega Boat, Carp Academy, CARPBOAT, KINCARP V1, K-KARP BLACK QUEEN, Carp Royal LORD and Carponizer.What is includedOne battery cover as shown. Seals, magnets, fasteners and other parts are included only when expressly stated in the current offer.Check before ordering and fittingCompare the cover shape, dimensions, edge profile, closing method and mounting points with the original part and confirm the upper-hull generation. Disconnect and remove the battery before fitting, inspect the sealing surface, keep the compartment dry and complete a careful splash and leak check before use on the water.
Special Offer
Scavenger Bait Boat Hopper Door
€29.00*
Hopper door for Scavenger bait boatsStrong ABS replacement door with integrated magnets for controlled bait release. It mounts to the lower hull with matching brackets and screws, works with the electromagnetic release system and supports hopper loads up to 5 kg.Compatibility checkCompare shape, dimensions, hinge and bracket positions, hole spacing, magnets and release mechanism with the original part; revisions can differ.Package contentsOne door with magnets. Brackets, screws, wiring and electromagnet are included only if explicitly listed.Installation and testDisconnect batteries, check alignment and free movement, then perform several dry release tests before use on water.
14.89
%
Scavenger Bait Boat Weed Guards Screws
€3.83*
€4.50*
Replacement screws for the Scavenger weed guardsThis BearCreeks screw set is intended for securing the propeller weed guards to the hull of compatible bait boats. It replaces missing, worn or damaged fasteners while allowing the original guards to remain in service.Package contentsThe package contains the weed-guard fixing screws only. Weed guards, hull parts and other accessories are not included.Compatible base platformsSuitable for the Scavenger base platform, including BearCreeks Scavenger and Scavenger Pro, iPilot50 and NG50, and compatible Waverunner MK-series boats. Model names can vary by market.Check and fit correctlyBefore ordering, compare the number of screws, thread, length, head shape and product photos with the original fasteners. Product number: V1.WeedGuardsScrews. Disconnect the battery before working near the propellers, tighten evenly without overtightening the plastic, and check that each guard is secure before use.
15
%
Scavenger Bait Boat Hooper Door Bracket & Screw Set
€5.10*
€6.00*
Hopper-door bracket and screw set for Scavenger bait boatsThis BearCreeks replacement kit contains one pair of brackets with screws for securing the feed-hopper doors to the lower hull.Compatibility / checkCheck hopper-door hinge design, bracket shape, mounting-hole spacing and screw dimensions against the photos. For Scavenger/Scavenger Pro, iPilot50/NG50, Waverunner MK1–MK4 and equivalent base-platform models.InstallationDisconnect the battery, support the doors, align both brackets and start all screws by hand. Tighten evenly and test free opening and closing on dry land.
15
%
Special Offer
BearCreeks 5.8G Bait Boats GPS Module
€24.65*
€29.00*
BearCreeks 5.8 GHz GPS moduleReplacement GPS module for compatible BearCreeks bait boats with autopilot. Package: one module; cables, antenna and remote are included only when stated.Compatibility checkFor iCatcher/iPilot40, Scavenger/iPilot50, Navitec/iPilot15 and Carpmate/iPilot18 platform families. Match the boat, GPS generation, 5.8 GHz controller, plugs and mounting points.InstallationDisconnect batteries, protect electronics from moisture and test GPS, steering and return functions on land before use.
Special Offer
5.8GHz Bait Boat Autopilot Upgrade Kit
€399.00*
5.8GHz Bait Boat Autopilot Upgrade KitThe BearCreeks 5.8GHz bait boat GPS autopilot upgrade kit is a game-changer for fishing enthusiasts. Not only does it offer advanced features such as automatic navigation and autopilot, but it also includes a spot-saving feature that allows you to save your favorite fishing spots and return to them with ease. In addition to its impressive capabilities, the autopilot upgrade kit also features a fail-safe function that ensures your boat returns home automatically in case of weak signal or low power.Plus, the kit shows the distance from the home spot, so you always know how far you are from your starting point. Overall, the BearCreeks 5.8G bait boat autopilot upgrade kit is an essential tool for any serious angler. With its advanced technology and fail-safe features, you can fish with confidence and efficiency, knowing that your bait boat will always navigate accurately and return home safely.BearCreeks 5.8G bait boat GPS upgrade kit is compatible with following bait boat models:Compatible model kitsGPS50BearCreeks Scavenger, Waverunner MK1/MK2/MK3/M4, Quad Bait Boat, TRANSPORTER, ANACONDA SEA GUARD, ULTIMATE BAIT CRUISER, Vega Boat, Carp Academy, CARPBOAT, KINCARP V1, K-KARP BLACK QUEEN Carp Royal LORD CarponizerGPS40BearCreeks iCatcher , CULT RANGER ANACONDA WAVE HOPPER, SKARP S60, CARPBOAT SKARP, KINCARP V3GPS18BearCreeks Carpmate, Waverunner SHUTTLE, Quad Bait Boat KOMPACT, Trend Micro, Vega Boat Micro, KINCARP V4, Carp Royal DukeGPS15BearCreeks Navitec, Waverunner ATOM, Quad Bait Boat EXPLORER, QUAD V2, ANACONDA TANK, TANK II, ULTIMATE BAIT CRUISER mini, Vega Boat mini, Carp Academy Small, CARPBOAT Mini, KINCARP V2, K-KARP TORMENTA SOUL Bait Solution Compatibility note: this 5.8GHz GPS upgrade kit is available for selected boat platforms and is not universal. Verify boat model, mainboard version, wiring, connectors, antenna and installation requirements before ordering.
Variants from €313.65*
Parts for Scavenger / iPilot50 bait boats
Find replacement parts for this bait boat family, sold under names including Scavenger, Scavenger Pro, iPilot50, Waverunner MK1–MK4. Names vary between markets, and parts from different production generations are not automatically interchangeable.
Before ordering, compare the part number, dimensions, mounting points and electrical connectors with the component fitted to your boat. If unsure, send our support team a photo of the original part.