REQUEST PRICE

Fields with * are required

Products from BearCreeks

1 From 7
No results were found for the filter!
Tungsten Tube Tungsten Tube
Tungsten Action Pack Tungsten tube dark green is a must for dark soil types, and can be used in combination with the dark green lead clip and tail rubber or with an inline system. The following individual parts are included: -3 x Rig...
€6.00
Navitec Bait Boat screw set for upper and lower hull 11 pieces Navitec Bait Boat screw set for upper and lower...
BearCreeks Navitec Bait Boat screw set for hull These screws are required to fix the upper and lower hull . The nuts are ready in the upper shell and only have to be fastened with these screws through the lower shell. Delivery contains:...
€5.00
Rod pod for 4 fishing rods - Rod Pod Construct 4 Rod pod for 4 fishing rods - Rod Pod Construct 4
Rod holder for 4 fishing rods - Rod Pod Construct 4 Are you looking for a really stable, handy and variable Rod Pod? Our Rod Pod Construct 4 should definitely attract your attention. This rod pod stands out for its compactness. You can...
€129.90
Hint!
3 + 1 FREE
Rod Rest BearCreeks Carp Fishing Rod Rest
Carp Fishing Rod Rest - BUY 3 GET 1 FREE (3+1) The BearCreeks Rod Rest is a very secure rear rod rest. The rubber covered spring steel arms safely prevent the rod from slipping out even during particularly violent runs. The Rod Rest can...
€6.49
Camouflage Top Hull for bait boat Camouflage Top Hull for bait boat
Bait boat hull upper shell - Camouflage A 3D CAD designed and precision injection molded ABS upper shell for a bait boat hull. Extremely stable, impact resistant and almost indestructible. You can find the matching bottom shell under the...
€80.00
BearCreeks Aerial Set for the BC202 Echo sounder BearCreeks Aerial Set for the BC202 Echo sounder
BearCreeks Aerial Set for the BC202 Echo sounder In our shop you have the possibility to buy the replacement antennas (aerials) for your BC202 echo sounder separately and as a set. The 400-470MHz flexible rubber antenna is fixed on the...
€8.00
BearCreeks BC201 Echo sounder Cable Set BearCreeks BC201 Echo sounder Cable Set
BearCreeks BC201 Echo sounder Cable Set With us you have the possibility to separately order the cables, which are available as standard setting for BC201 depth sounder. Please choose the cable you need: an external power cable of the...
€9.00
fishing cap BearCreeks Fishing Cap
BearCreeks Fishing Cap You have purchased the BearCreeks equipment and would like to complete it with a cool branded cap? There you go! Unisex, olive-colored, high quality fishing cap with BearCreeks logo. If you purchase a bait boat -...
€19.99
BearCreeks backpack for bait boats BearCreeks backpack for bait boats
BearCreeks backpack for bait boats Are you searching for a perfect backpack which fits your bait boat and leaves your hands free? Here is the deal! Military-green colour, custom-made backpack for Navitec and iCatcher bait boats series!...
€39.00
Propeller clip Propeller clip
Propeller clip In order to fix the propeller on the motor, such clips are needed. Delivery contains: 2x Propeller Clips
€4.00
iCatcher Bait Boat Main Switch Cable Set iCatcher Bait Boat Main Switch Cable Set
BearCreeks Main Switch Cable Set for iCatcher Bait Boat Complete main cable set including on/off switch , contact plug for charger and echo sounder for BearCreeks iCatcher baitboat. The cable set is installed in the top and bottom shells...
€29.00
iCatcher Backlight Screws iCatcher Backlight Screws
iCatcher Back Lights Screws With these stainless steel screws the rear lights are easily attached to the iCatcher Baitboat. Contents: 6x stainless steel screws
€2.50
iCatcher front light screws iCatcher front light screws
iCatcher front light screws These stainless steel screws easily attach the front light to the iCatcher Baitboat hull top shell. Contents: 2x stainless steel screws
€1.60
iCatcher Futterboot Frontlicht iCatcher Futterboot Frontlicht
iCatcher BiatBoat Front Light Front light spare part for iCatcher, iCatcher Lithium Version and iCather Pro Contents: FrontLight set Please note that the screws are not included!
€12.00
iCatcher Futterboot Rücklicht iCatcher Futterboot Rücklicht
iCatcher Futterboot Rücklicht Rücklicht Ersatzteil für iCatcher , iCatcher Lithium Version und iCather Pro Inhalt : RückLicht set Bitte beachten Sie, dass die Schrauben nicht im Lieferumfang enthalten sind!
€15.00
GPS Receiver Cable GPS Receiver Cable
BearCreeks GPS Receiver Cable Replacement cable for BearCreeks feedboat receiver. Suitable for all our feedboats that have a GPS function. Scope of delivery: 1x cable with matching plugs Please note that this cable fits only to the...
€4.00
Scavenger Pro Magnet Kabel Scavenger Pro Magnet Kabel
BearCreeks Scavenger Pro Futterboot Kabel für Futterklappen- und Releasekupplung-Magneten Kabel für die Futterklappen Magneten . Diese werden mit den Auslösermagneten und dem Mainboard innerhalb des Futterboot-Rumpfes verbunden und...
€9.00
Navitec Pro Magnet Cable Navitec Pro Magnet Cable
BearCreeks Navitec Pro Feed Boat Cable for Feed Flap and Release Clutch Magnets. Cables for the chuck flap magnets . These connect to the release magnets and the main board inside the bait boat hul l and allow the forage flaps to be...
€9.00
Carpmate Pro Magnet Kabel Carpmate Pro Magnet Kabel
Carpmate Pro Magnet Kabel Kabel für die Futterklappen Magneten . Diese werden mit den Auslösermagneten und dem Mainboard innerhalb des Futterboot-Rumpfes verbunden und ermöglichen das Öffnen der Futterklappen mit Hilfe der Fernsteuerung.
€9.00
iCatcher Mini Magnet Cable iCatcher Mini Magnet Cable
BearCreeks iCatcher Mini Feeder Boat Cable for Feeder Flap and Release Clutch Magnets. Cables for the chuck flap magnets . These connect to the release magnets and the main board inside the feedboat hull and allow the feedgates to be...
€9.00
Adapter Cable for iCatcher Pro & Scavenger Pro Mainboard Adapter Cable for iCatcher Pro & Scavenger Pro...
BearCreeks Adapter Cable for iCatcher Pro & Scavenger Pro Mainboard If the connectors on your mainboard differ, you will need this cable. Please look at the picture, if necessary contact us for advice. The cable also fits to bait boats...
€5.00
Adapter Cable for Navitec Pro & Carpmate Pro Mainboard Adapter Cable for Navitec Pro & Carpmate Pro...
BearCreeks Adapter Cable for Navitec Pro & Carpmate Pro Mainboard If the connectors on your mainboard differ, you will need this cable. Please look at the picture, if necessary contact us for advice. The cable also fits to bait boats...
€5.00
iCatcher Bait Boat Screws Set for Upper and Lower Shell iCatcher Bait Boat Screws Set for Upper and...
BearCreeks iCatcher Bait Boat Screws Set for Upper and Lower Shell These screws are needed to fix the upper and lower shell . Scope of delivery: complete set of upper & lower shell screws. Also suitable for the following bait boats:...
€8.00
iCatcher Pro Magnet Kabel iCatcher Pro Magnet Kabel
BearCreeks iCatcher Pro Futterboot K abel für Futterklappen- und Releasekupplung-Magneten Kabel für die Futterklappen Magneten . Diese werden mit den Auslösermagneten und dem Mainboard innerhalb des Futterboot-Rumpfes verbunden und...
€9.00
BearCreeks Navitec bait boat cable for hooper door electro magnets BearCreeks Navitec bait boat cable for hooper...
BearCreeks Navitec bait boat cable for hooper door electro magnets Cable for the hopper door magnets . These have to connect to the hopper door magnets and the mainboard inside the bait boat hull and allow the bait flaps to be opened by...
€9.00
BC151 Echo sounder Transmitter BC151 Echo sounder Transmitter
BC151 Echo sounder Transmitter This part is fixed inside of your bait boat and sends the data collected from the transducer to your display over the radio connection. Transmitter is also suitable for Toslon TF500 echo sounder.
€155.00
Connecting cable for lead acid battery charger Connecting cable for lead acid battery charger
Connecting cable for lead acid battery charger In order to connect your lead acid battery (yellow plug) to the battery charger, you will need this cable.
€8.00
iCatcher Pro Bait Boat Mainboard with GPS function iCatcher Pro Bait Boat Mainboard with GPS function
BearCreeks iCatcher Pro Bait Boat Mainboard with GPS The mainboard is needed to control all important functions for the iCatcher Pro with GPS function. No drilling or gluing required, the mainboard is easily fixed in the middle of the...
€135.00
iCatcher bait boat Separation Flap iCatcher bait boat Separation Flap
iCatcher bait boat Separation Flap With this "dividing flap" you can quickly make 2 chambers from one bait chamber. Fits V3 bait boat models only: BearCreeks iCatcher, iCatcher Pro Anaconda Wave Hopper Cult Ranger Skarp S60
€10.00
iCatcher Rubber Seals for charging connectors iCatcher Rubber Seals for charging connectors
iCatcher Rubber Seals for charging connectors With these rubber seals you can guarantee that no water will drain inside the charging connectors of your bait boat. Delivery scope: 2 pcs of rubber seals (as can be seen on the picture)
€5.00
iCatcher Mini baitboat motor screws iCatcher Mini baitboat motor screws
Screws for BearCreeks iCatcher Mini baitboat motor The screws are necessary for mounting both motors. The price is shown per screws set.
€3.00
Navitec Motor Mount Screws & Screw Nuts Navitec Motor Mount Screws & Screw Nuts
Navitec Motor Mount Screws & Screws Nuts To fix the motor mounts you need these screws and screws nuts. Delivery scope: 1 set of screws and screw nuts (as can be seen on the picture)
€2.40
Navitec weed guards screws Navitec weed guards screws
Screws for BearCreeks Carpmate baitboat weed guards These screws are used to attach the weed guard to the baitboat bottom shell . Scope of delivery: 4x stainless steel screws
€2.40
Navitec Carrying Handle Mount and screws Navitec Carrying Handle Mount and screws
Mount and screws for Navitec Carrying Handle To attach the handle to the bait boat top shell , you need these brackets and screws. The price is shown for the entire set. Scope of delivery: Brackets & screws
€8.00
Scavenger Motor Mount Screws Scavenger Motor Mount Screws
Scavenger Motor Mount Screws To fix the motor mounts you need these screws. The price is shown per 1 screw. Please select the required number yourself.
€3.20
Mount and screws for Scavenger Carrying Handle Mount and screws for Scavenger Carrying Handle
Mount and screws for Scavenger Carrying Handle To attach the handle to the bait boat top shell , you need these brackets and screws. The price is shown for the entire set. Scope of delivery: Brackets & screws
€12.00
1 From 7
Viewed
chatImage
BearCreeks WhatsApp Chat
Yana | BearCreeks
Yana | BearCreeks
Hello! Please leave your question here and I will reply as soon as possible.
Welcome in our store! Thank you for your question! For the quick reply please write us during our opening hours (Mo-Fr 9:00-17:00)
whatspp icon whatspp icon