BearCreeks Bait Boat 5.8GHz 4 Channel Digital Remote Control Manufactured by FLYSKY

The BearCreeks 5.8GHz 4 Channel  Bait Boat Digital Remote Control Full control of your bait boat, with the possibility of separate engine trim, speed adjustment for forward and reverse drive, adjustment of the LED light system, triggering of the feed flap opening. With easy to read display, which also shows the voltage of the battery and the boat battery. This remote control can be quickly connected to your baitboat without complex configurations.  The joysticks on our remote controls were customized according to the habits and wishes of our customers. The left joystick (with the help of which you open the hopper doors and release the hook) is very sensitive, you just need to slightly push the joystick to the left or right and the needed function will be performed. PLEASE NOTE: do not continuously press the joystick, this will lead to magnets burnout and might damage the wiring. The right joystick (with the help of which you direct the boat) can be brought to the steady position, so that when you want to bring the boat 500m forward, you do not need to constantly press the joystick. It is enough to bring it to the steady position once and then manually bring it to the neutral position, when you would like to stop the boat. This remote control is suitable for all baitboats with a 4 channel and 5.8Ghz system and fits for following models: BearCreeks Navitec, Carpmate, iCatcher, iCatcer Mini , Navimate  Ultimate Bait Cruiser Mini Carpboat BearCreeks Navitec, Carpmate, iCatcher, iCatcer Mini , Navimate Quad Bait Boat Explorer, KINCARP V2 V3 V4 V6 Spartan  Albatros - Soul Anaconda WAVE HOPPER, WAVE JET, TANK II  Carponizer Please note: The handset is delivered together with the receiver and the antenna. Compatibility note: for selected 5.8GHz four-channel bait boat systems only. Verify receiver generation, channel functions, connectors, antenna and pairing compatibility before ordering.