iCatcher Mini / Waverunner Sport / iPilot20

BearCreeks Baitboat Antenna with 5.8GHz System This antenna for your baitboat is simply screwed to the stern of the boat and is suitable for the following bait boats with a 5.8Ghz system:   BearCreeks Navic Scavenger, Navitec, iCatcher, iCatcher Mini, Navimate, Carpmate Waverunner MK4, Atom, Shuttle, Sport Quad Bait Boat Transporter, Explorer KINCARP V1 V2 V3 V4 V6  Anaconda Wave Hopper, Wave Jet, TANK  

Bait Boat Hopper Drop Electro Magnet Set Bait boat release magnets - electromagnetic control of the hopper doors. They enable a 100% opening of the flaps. In contrast to other bait boat manufacturers with servo control, our system has the advantage that the flaps open quickly, quietly and above all always. Easy installation with the suiable screws, no soldering or complex gluing necessary. This Hopper Drop Electro Magnet set is easy to install in the top and bottom hull and connect to the mainboard. No drilling needed, because all drillings are already there in the hulls. For Scavenger and other bait boats with 2 feed flaps, you need 4 pcs. of release magnets, for all other bait boats with one feeding chamber - 2 pcs. Please select the correct number when purchasing. Complete Electro Magnet set is suitable for the bait boats below: BearCreeks Scavenger, iCatcher, Navitec, iCatcher Mini, Carpmate Waverunner MK 1/2/3/4, Atom, Shuttle, Sport KINCARP V1, V2, V3, V4, V6 Anaconda SEA GUARD, Tank, Wave Hopper, Wave Jet QUAD BAIT BOAT TRANSPORTER, Explorer, Kompakt KKarp Black Queen Bait Boat SPORT CARP Bait Boat VEGABOAT BaitCruiser, Bait Cruiser Mini, Skarp S60, Trend Micro, Navimate CARPBOAT, Carponizerand others Delivery contains: 1x Hopper Drop ElectroMagnet Set (4 Electromagnets)  Please note that the screws are not included in the delivery, they must be ordered separately.

Bait Boat Rubber Seal in Meter

The BearCreeks 5.8GHz 4 Channel  Bait Boat Digital Remote Control Full control of your bait boat, with the possibility of separate engine trim, speed adjustment for forward and reverse drive, adjustment of the LED light system, triggering of the feed flap opening. With easy to read display, which also shows the voltage of the battery and the boat battery. This remote control can be quickly connected to your baitboat without complex configurations.  The joysticks on our remote controls were customized according to the habits and wishes of our customers. The left joystick (with the help of which you open the hopper doors and release the hook) is very sensitive, you just need to slightly push the joystick to the left or right and the needed function will be performed.PLEASE NOTE: do not continuously press the joystick, this will lead to magnets burnout and might damage the wiring. The right joystick (with the help of which you direct the boat) can be brought to the steady position, so that when you want to bring the boat 500m forward, you do not need to constantly press the joystick. It is enough to bring it to the steady position once and then manually bring it to the neutral position, when you would like to stop the boat. This remote control is suitable for all baitboats with a 4 channel and 5.8Ghz system and fits for following models: BearCreeks Navitec, Carpmate, iCatcher, iCatcer Mini , Navimate  Ultimate Bait Cruiser Mini Carpboat BearCreeks Navitec, Carpmate, iCatcher, iCatcer Mini , Navimate Quad Bait Boat Explorer, KINCARP V2 V3 V4 V6 Spartan  Albatros - Soul Anaconda WAVE HOPPER, WAVE JET, TANK II  Carponizer Please note: The handset is delivered together with the receiver and the antenna.

BearCreeks 40MHz Remote Control for Bait Boats 4 Channel

These BearCreeks Baitboat Hopper Electromagnets offer a convenient solution for controlling the bait hopper of your bait boat. The magnets are designed to enable a 100% opening of the flaps with electromagnetic control, which opens the flaps quickly, quietly and efficiently. Unlike servo driven baitboat manufacturers, these magnets do not require any soldering or complex gluing for installation, making the process quick and easy.

Battery lead with DC5525 / XT60H-F Connector Battery cable for lead acid or lithium batteries. Please check your plug to buy the right cable. Price per piece.

BearCreeks Baitboat 5.8GHz Remote Control Receiver Receiver for your BearCreeks Bait boat with 5.8GHz system and guarantees a range up to 600m. No drilling or gluing needed. Easy to install with the fitting bracket and screws into thetop hull. Delivery contains: 5.8GHz receiver Optional Extras: Bracket for ReceiverAntenna

Protect your bait boat's engine and propellers with the iCatcher Mini Bait Boat Weed Guards. These unique guards feature a jet-like design that prevents deadwood, algae, creepers, and other objects in the water from damaging your boat. They work quietly and efficiently to ensure a smooth and hassle-free fishing experience. The iCatcher Mini Bait Boat Weed Guards are compatible with the following bait boats: BearCreeks iCatcher Mini BearCreeks Navimate BearCreeks iPilot20 BearCreeks NG20 KINCARP V6 Anaconda Wave Jet Navic Navimate Waverunner Sport Quad Bait Boat Speed GT Raven Tactic V3 KKarp Ardito Bait Boat SPORT CARP Bait Boat CARPBOAT Small Jet

The BearCreeks bait boat sonarbox with rubber seal is an accessory for fishermen who want to use an echo sounder with their bait boat. The sonarbox is designed to be inserted into the echo sounder recess in the lower shell of the bait boat hull. If the cover or rubber seal of the echo sounder is lost or damaged, a replacement rubber washer can be ordered to ensure a proper fit. The package contains one empty echo sonar box and one rubber washer.

The BearCreeks Carpmate Baitboat Propeller is a reliable and sturdy propeller made from ABS that can efficiently transport the bait boat to the desired fishing location. This propeller is compatible with both the Carpmate and iCatcher mini bait boats and can be easily attached to their motor axis using the appropriate clips.

This 40MHz antenna is designed for use with Quad, BaitCruiser, Shuttle, Atom and Waverunner Bait Boats that feature a telescopic transmitter antenna. If your boat falls into any of these categories and includes a telesopic transmitter aerial, the antenna listed here is compatible with your boat.

BearCreeks Screws for Hopper Doors Release Magnets To attach the hopper door release magnets, you need these screws. The price is shown per 1 screw, please choose the number you need yourself.

Replacement Antenna for BearCreeks Bait Boat with 2.4GHz system If you have lost an antenna or it happens to be defective, you can reorder it from us here. These antennas are suitable for the all bait boats from BearCreeks with 2.4GHz system. Scope of delivery: 1x antenna for the bait boat from bearcreeks.    

Washer for hook release magnet.

The iCatcher Mini Bait Boat LED Lights Rubber Set is a set of rubber components designed to keep the LED lights on the bait boat waterproof. It is compatible with the following bait boat models: BearCreeks iCatcher Mini KINCARP V6 Anaconda Wave Jet Navic Navimate Waverunner Sport Raven Tactic V3 Speed GT bait boat KKarp Ardito Bait Boat SPORT CARP Bait Boat CARPBOAT Small Jet

The propeller clip is a small, spring-loaded device that is used to secure a propeller onto a motor shaft. The clip fits onto the end of the shaft and grips the propeller securely, preventing it from slipping or coming loose during operation.

Ultimate Bait Boat Upgrade Kit: Boat Control, GPS Autopilot, and Power Bank - All-in-One Solution for Precise Navigation and Extended Operating Times in Carp Fishing.The iPilot GPS autopilot technology is presented by Navison Group and now exclusively used by BearCreeks GmbH. The "Boat Control + GPS Autopilot + Power Bank," All-In-One Upgrade Kit for bait boats is a must-have for carp fishing bait boat enthusiasts. With its high precision navigation, user-friendly interface, and long-range capabilities, your fishing experience will be more efficient and enjoyable. Upgrade your fishing trip today with the iPilot Upgrade Kit. Main Features:1.      Self-Calibration: The iPilot system has a self-calibration feature that starts with a command from the handset. 2.      Spot Saving: The iPilot Upgrade Kit enables you to save 26 fishing spots, including a home spot, on different waters. This makes it easier to return to your favorite fishing spots, saving you time and effort. 3.      Precise Navigation: The iPilot system is equipped with highly precise navigation, allowing the boat to automatically sail straightly from spot to spot with 90% accuracy within 1m. 4.      Long-Range and Failsafe Auto Home Mode: The iPilot Upgrade Kit offers a range of 400-600m and has a failsafe auto home mode, ensuring the safety of your bait boat in case of low power or weak signal. 5.      Built-in Lithium Handset Battery: The iPilot Upgrade Kit includes built in 3.7V 12000mAh lithium Handset battery, providing up to 24 hours of intensive outdoor use, so you can spend more time fishing. 6.      Power Bank Functionality: The large capacity handset battery can also serve as a power bank for your smartphone. 7.      User-Friendly Interface: The iPilot Upgrade Kit features a 480*272 Pixel color display, showing parameters such as the compass, driving direction, power status of the boat and handset, and distance to the spot. This makes the system easy to use and understand. 8.      Compatible with Bait Boats: There is an iPilot kit to fit your needs, whether you have a small or large bait boat. The iPilot System is compatible with following bait boat models:iPilot50.Kit Fits: BearCreeks Scavenger and Scavenger Pro, Waverunner MK1/MK2/MK3/M4, Quad Bait Boat TRANSPORTER, ANACONDA SEA GUARD, ULTIMATE BAIT CRUISER, Vega Boat, Carp Academy, CARPBOAT, KINCARP V1, K-KARP BLACK QUEEN, Carp Royal LORD, CarponizeriPilot40.Kit Fits: BearCreeks iCatcher and iCatcher Pro, CULT RANGER, ANACONDA WAVE HOPPER, SKARP S60, CARPBOAT SKARP, KINCARP V3 iPilot20.Kit Fits: BearCreeks iCatcher Mini, Navimate, Waverunner SPORT, Quad Bait Boat Speed GT, ANACONDA WAVE JET, CARPBOAT SMALL JET, KINCARP V6, K-KARP ARDITOiPilot18.Kit Fits: BearCreeks Carpmate and Carpmate Pro, Waverunner SHUTTLE, Quad Bait Boat KOMPACT, Trend Micro, Vega Boat Micro, KINCARP V4, Carp Royal DukeiPilot15.Kit Fits: BearCreeks Navitec and Navitec Pro, Waverunner ATOM, Quad Bait Boat EXPLORER, QUAD V2, ANACONDA TANK, TANK II, ULTIMATE BAIT CRUISER mini, Vega Boat mini, Carp Academy Small, CARPBOAT Mini, KINCARP V2, K-KARP TORMENTA, SOUL Bait Solution

BearCreeks baitboat 2.4GHz remote control / handset + receiver Full control of your baitboat, with the possibility of a separate motor trim, speed adjustment for forward and backward way, adjustment of the LED light system, triggering of the hopper door opening. The handset has an easy to read display, which also shows the remaining charge of the remote control battery and the baitboat battery. This remote control can be quickly connected to your baitboat without complex configurations.  Please note: The handset is delivered together with the receiver and the antenna. The joysticks on our remote controls were customized according to the habits and wishes of our customers. The left joystick (with the help of which you open the hopper doors and release the hook) is very sensitive, you just need to slightly push the joystick to the left or right and the needed function will be performed. PLEASE NOTE: do not continuously press the joystick, this will lead to magnets burnout and might damage the wiring. The right joystick (with the help of which you direct the boat) can be brought to the steady position, so that when you want to bring the boat 500m forward, you do not need to constantly press the joystick. It is enough to bring it to the steady position once and then manually bring it to the neutral position, when you would like to stop the boat.   This remote control is suitable for all baitboats with a 4 or 6 channel and 2.4GHz system and fits the following models: BearCreeks iCatcher Mini Carponizerand others Please write us a message to figure out which of our handsets is suitable for your bait boat.

The BearCreeks Carpmate Bait Boat Screw Set for Hull is a necessary accessory for securely fixing the upper and lower hull. With 11 pieces included, the nuts in the upper shell can easily be fastened through the lower shell with these screws. Ensure a strong and stable hull for your bait boat with this screw set.

iCatcher Mini bait boat engine incl. Motor coupling and Oil seal Super powerful and quiet engines for iCatcher Mini bait boats. This will get your boat really going and bring your bait boat quickly to the desired fishing hot spot. Easy installation, no soldering and no complex configuration required. The motors are attached to the bottom of the bait boat with the appropriate motor bracket and connected to the motor trimmer. The matching propellers are not included and must be ordered separately. These motors also fit to the following baitboats: BearCreeks iCatcher Mini KINCARP V6 Anaconda Wave Jet Navic Navimate Waverunner Sport Raven Tactic V3 Speed GT bait boat KKarp Ardito Bait Boat SPORT CARP Bait Boat CARPBOAT Small Jet

BearCreeks iCatcher Mini Baitboat Cover for ON/OFF Switch Stable cover made of ABS for the on / off switch and battery charging socket on the stern of the bait boat. Fits for the following boats:  BearCreeks iCatcher Mini KINCARP V6 Anaconda Wave Jet Navic Navimate Waverunner Sport, Raven Tactic V3 Speed GT KKarp Ardito SPORT CARP CARPBOAT Small Jet bait boats  

iCatcher Mini Bait Boat Main Switch This main switch is required to switch your bait boat on and off. Easy installation in the baitboat top hull, it is attached to the mainboard by means of a plug. Fits for further following models: KINCARP V6 Anaconda Wave Jet Navic Navimate Waverunner Sport Raven Tactic V3 Speed GT KKarp Ardito SPORT CARP CARPBOAT Small Jet bait boats

The iCatcher Mini bait boat hopper doors are designed to be compatible with several bait boat models, including the Anaconda WaveJet, Navimate, KINCARP V6, Waverunner Sport, KKarp Ardito, CARPBOAT Small Jet, Speed GT, and SPORT CARP. These hopper doors come equipped with strong magnets. It's important to check the compatibility of these hopper doors with your specific bait boat model before purchasing them to ensure a proper fit.