Go to homepage
€0.00*
Show all categories Carpmate / Waverunner Shuttle / iPilot18
Back Show Carpmate / Waverunner Shuttle / iPilot18
Filter
–

Carpmate / Waverunner Shuttle / iPilot18

42.86 %
Special Offer
5.8GHz Antenna for Baitboat
5.8GHz Antenna for Bait Boats
BearCreeks Baitboat Antenna with 5.8GHz System This antenna for your baitboat is simply screwed to the stern of the boat and is suitable for the following bait boats with a 5.8Ghz system:   BearCreeks Navic Scavenger, Navitec, iCatcher, iCatcher Mini, Navimate, Carpmate Waverunner MK4, Atom, Shuttle, Sport Quad Bait Boat Transporter, Explorer KINCARP V1 V2 V3 V4 V6  Anaconda Wave Hopper, Wave Jet, TANK  

€16.00* €28.00*
24 %
Special Offer
Bait Boat Hopper Drop Electro Magnet Set Bait Boat Hopper Drop Electro Magnet Set
Bait Boat Hopper Drop Electro Magnet Set
Bait Boat Hopper Drop Electro Magnet Set Bait boat release magnets - electromagnetic control of the hopper doors. They enable a 100% opening of the flaps. In contrast to other bait boat manufacturers with servo control, our system has the advantage that the flaps open quickly, quietly and above all always. Easy installation with the suiable screws, no soldering or complex gluing necessary. This Hopper Drop Electro Magnet set is easy to install in the top and bottom hull and connect to the mainboard. No drilling needed, because all drillings are already there in the hulls. For Scavenger and other bait boats with 2 feed flaps, you need 4 pcs. of release magnets, for all other bait boats with one feeding chamber - 2 pcs. Please select the correct number when purchasing. Complete Electro Magnet set is suitable for the bait boats below: BearCreeks Scavenger, iCatcher, Navitec, iCatcher Mini, Carpmate Waverunner MK 1/2/3/4, Atom, Shuttle, Sport KINCARP V1, V2, V3, V4, V6 Anaconda SEA GUARD, Tank, Wave Hopper, Wave Jet QUAD BAIT BOAT TRANSPORTER, Explorer, Kompakt KKarp Black Queen Bait Boat SPORT CARP Bait Boat VEGABOAT BaitCruiser, Bait Cruiser Mini, Skarp S60, Trend Micro, Navimate CARPBOAT, Carponizerand others Delivery contains: 1x Hopper Drop ElectroMagnet Set (4 Electromagnets)  Please note that the screws are not included in the delivery, they must be ordered separately.

€19.00* €25.00*
Details
20 %
Special Offer
Scavenger Futterboot Gummidichtung
Bait Boat Rubber Seal in Meter
Bait Boat Rubber Seal in Meter

€10.00* €12.50*
28.78 %
BearCreeks Baitboat 4 Channel 5.8GHz Digital Remote Control
BearCreeks Bait Boat 5.8GHz 4 Channel Digital Remote Control Manufactured by FLYSKY
The BearCreeks 5.8GHz 4 Channel  Bait Boat Digital Remote Control Full control of your bait boat, with the possibility of separate engine trim, speed adjustment for forward and reverse drive, adjustment of the LED light system, triggering of the feed flap opening. With easy to read display, which also shows the voltage of the battery and the boat battery. This remote control can be quickly connected to your baitboat without complex configurations.  The joysticks on our remote controls were customized according to the habits and wishes of our customers. The left joystick (with the help of which you open the hopper doors and release the hook) is very sensitive, you just need to slightly push the joystick to the left or right and the needed function will be performed.PLEASE NOTE: do not continuously press the joystick, this will lead to magnets burnout and might damage the wiring. The right joystick (with the help of which you direct the boat) can be brought to the steady position, so that when you want to bring the boat 500m forward, you do not need to constantly press the joystick. It is enough to bring it to the steady position once and then manually bring it to the neutral position, when you would like to stop the boat. This remote control is suitable for all baitboats with a 4 channel and 5.8Ghz system and fits for following models: BearCreeks Navitec, Carpmate, iCatcher, iCatcer Mini , Navimate  Ultimate Bait Cruiser Mini Carpboat BearCreeks Navitec, Carpmate, iCatcher, iCatcer Mini , Navimate Quad Bait Boat Explorer, KINCARP V2 V3 V4 V6 Spartan  Albatros - Soul Anaconda WAVE HOPPER, WAVE JET, TANK II  Carponizer Please note: The handset is delivered together with the receiver and the antenna.

€99.00* €139.00*
28.99 %
Special Offer
BearCreeks 40MHz Remote Control for Bait Boats 4 Channel
BearCreeks 40MHz Remote Control for Bait Boats 4 Channel
BearCreeks 40MHz Remote Control for Bait Boats 4 Channel

€49.00* €69.00*
24 %
Special Offer
BearCreeks Carpmate Baitboat Magnets for Bait Drops
Bait Boat Bait Hopper Electromagnets
These BearCreeks Baitboat Hopper Electromagnets offer a convenient solution for controlling the bait hopper of your bait boat. The magnets are designed to enable a 100% opening of the flaps with electromagnetic control, which opens the flaps quickly, quietly and efficiently. Unlike servo driven baitboat manufacturers, these magnets do not require any soldering or complex gluing for installation, making the process quick and easy.

€19.00* €25.00*
35.56 %
Special Offer
battery cable bait boat Battery lead with DC5525 / XT60H-F Connector
Battery lead with DC5525 / XT60H-F Connector
Battery lead with DC5525 / XT60H-F Connector Battery cable for lead acid or lithium batteries. Please check your plug to buy the right cable. Price per piece.

€2.90* €4.50*
Details
26.67 %
Special Offer
BearCreeks Navitec Bait Boat 5.8GHz Remote control Receiver
Bait Boat 5.8GHz Remote Control Receiver
BearCreeks Baitboat 5.8GHz Remote Control Receiver Receiver for your BearCreeks Bait boat with 5.8GHz system and guarantees a range up to 600m. No drilling or gluing needed. Easy to install with the fitting bracket and screws into thetop hull. Delivery contains: 5.8GHz receiver Optional Extras: Bracket for ReceiverAntenna

€33.00* €45.00*
BearCreeks Carpmate Futterboot Main-Switch-Loom
Carpmate Bait Boat Main-Switch-Loom
The BearCreeks Main-Switch-Loom is a complete main cable set that includes an on/off switch, a contact plug for the charger, and an echo sounder for the Carpmate bait boat. This set is installed in the upper and lower shells of the boat and connected to the mainboard, ensuring seamless functionality of the bait boat.

€29.00*
Details
15.04 %
Special Offer
BearCreeks GPS Autopilot Upgrade Kit für Futterboote
5.8GHz Bait Boat Autopilot Upgrade Kit
The BearCreeks 5.8GHz bait boat GPS autopilot upgrade kit is a game-changer for fishing enthusiasts. Not only does it offer advanced features such as automatic navigation and autopilot, but it also includes a spot-saving feature that allows you to save your favorite fishing spots and return to them with ease. In addition to its impressive capabilities, the autopilot upgrade kit also features a fail-safe function that ensures your boat returns home automatically in case of weak signal or low power. Plus, the kit shows the distance from the home spot, so you always know how far you are from your starting point. Overall, the BearCreeks 5.8G bait boat autopilot upgrade kit is an essential tool for any serious angler. With its advanced technology and fail-safe features, you can fish with confidence and efficiency, knowing that your bait boat will always navigate accurately and return home safely. BearCreeks 5.8G bait boat GPS upgrade kit is compatible with following bait boat models: GPS50 Kit Fits: BearCreeks Scavenger, Waverunner MK1/MK2/MK3/M4,  Quad Bait Boat, TRANSPORTER, ANACONDA SEA GUARD, ULTIMATE BAIT CRUISER, Vega Boat, Carp Academy, CARPBOAT, KINCARP V1, K-KARP BLACK QUEEN Carp Royal LORD Carponizer GPS40 Kit Fits: BearCreeks iCatcher , CULT RANGER  ANACONDA WAVE HOPPER,  SKARP S60, CARPBOAT SKARP,  KINCARP V3  GPS18 Kit Fits: BearCreeks Carpmate, Waverunner SHUTTLE,  Quad Bait Boat KOMPACT,  Trend Micro,  Vega Boat Micro,  KINCARP V4,  Carp Royal Duke GPS15 Kit Fits: BearCreeks Navitec, Waverunner ATOM, Quad Bait Boat EXPLORER, QUAD V2, ANACONDA TANK, TANK II, ULTIMATE BAIT CRUISER mini, Vega Boat mini, Carp Academy Small, CARPBOAT Mini, KINCARP V2, K-KARP TORMENTA SOUL Bait Solution

Variants from €299.00*
€339.00* €399.00*
40.08 %
Carpmate Bait Boat Lead Acid Battery Charging Cable with DC5525 Battery Lead
Carpmate Bait Boat Lead Acid Battery Charging Cable with DC5525 Battery Lead
Carpmate Bait Boat Lead Acid Battery Charging Cable with DC5525 Battery Lead

€2.99* €4.99*
25 %
Special Offer
BearCreeks Carpmate bait boat echo sounder cover with rubber seal
Bait Boat Sonar Box with Rubber Real
The BearCreeks bait boat sonarbox with rubber seal is an accessory for fishermen who want to use an echo sounder with their bait boat. The sonarbox is designed to be inserted into the echo sounder recess in the lower shell of the bait boat hull. If the cover or rubber seal of the echo sounder is lost or damaged, a replacement rubber washer can be ordered to ensure a proper fit. The package contains one empty echo sonar box and one rubber washer.

€6.00* €8.00*
BearCreeks Scavenger Bait Boat Propeller BearCreeks Carpmate Baitboat Propeller pair
Bait Boat Propellers for Carpmate & iCatcher Mini
The BearCreeks Carpmate Baitboat Propeller is a reliable and sturdy propeller made from ABS that can efficiently transport the bait boat to the desired fishing location. This propeller is compatible with both the Carpmate and iCatcher mini bait boats and can be easily attached to their motor axis using the appropriate clips.

€12.00*
14.39 %
BearCreeks Bait Boat 5.8Ghz 4 Channel Digital Remote Control
BearCreeks Bait Boat GPS 5.8GHz 4 Channel Digital Remote Control Manufactured by FLYSKY
BearCreeks 5.8GHz 4 Channel Bait Boat Digital Remote Control with GPS-Function Full control of your bait boat, with the possibility of separate engine trim, speed adjustment for forward and reverse sail, adjustment of the LED light system, triggering of the feed flap opening and programing the GPS-Autopilot settings. You have the possibility to add 21 different fishing hot spots and you bait boat will drive automatically to these spots. Equipped with an easy-to-read display, which also shows the voltage of the battery and the boat battery. This remote control can be quickly connected to your baitboat with GPS without complex configurations.  The joysticks on our remote controls were customized according to the habits and wishes of our customers. The left joystick (with the help of which you open the hopper doors and release the hook) is very sensitive, you just need to slightly push the joystick to the left or right and the needed function will be performed.PLEASE NOTE: do not continuously press the joystick, this will lead to magnets burnout and might damage the wiring. The right joystick (with the help of which you direct the boat) can be brought to the steady position, so that when you want to bring the boat 500m forward, you do not need to constantly press the joystick. It is enough to bring it to the steady position once and then manually bring it to the neutral position, when you would like to stop the boat. This remote control is suitable for all baitboats with a 4 channel and 5.8Ghz system and fits for following models: BearCreeks Navitec Pro, Carpmate Pro, iCatcherPro,  KINCARP V2 V3 V4 Anaconda WAVE HOPPER, Not suitable for V6 models, Navimate or iCatcher Mini Please note: The handset is delivered together with the receiver and the antenna.

€119.00* €139.00*
34 %
Special Offer
40MHz Bait Boat Antenna
40MHz Bait Boat Antenna
This 40MHz antenna is designed for use with Quad, BaitCruiser, Shuttle, Atom and Waverunner Bait Boats that feature a telescopic transmitter antenna. If your boat falls into any of these categories and includes a telesopic transmitter aerial, the antenna listed here is compatible with your boat.

€9.90* €15.00*
BearCreeks Screws for Hopper Doors Release Magnets
BearCreeks Screws for Hopper Doors Release Magnets
BearCreeks Screws for Hopper Doors Release Magnets To attach the hopper door release magnets, you need these screws. The price is shown per 1 screw, please choose the number you need yourself.

€2.20*
Carpmate Bait Boat Hook Release Electromagnet
Carpmate Bait Boat Hook Release Electromagnet
BearCreeks Carpmate Baitboat Hook Release Electromagnet With the hook release electromagnet, you can equip your Carpmate bait boat with a release hook and thus bring a carp or predator rig to the right fishing spot. The magnet is controlled electronically and has the advantage over other bait boat manufacturers with servo control, beacuse our system always and safely releases the carp or predator rig. Please note: The release clutch hook pin holder must be ordered separately. Delivery contains: Electromagnet for Hook Release Cover & Screws  Please note that the washers must be ordered separately.

€19.00*
BearCreeks Carpmate Weed Guards BearCreeks Carpmate Futterboot Propeller Algenschutz
Carpmate Bait Boat Weed Guards
The BearCreeks Carpmate Baitboat Propeller Weed Guards provide a durable and effective solution to protect your bait boat propellers from algae, creepers, water lilies, dead wood, or other floating objects that can cause damage. These weed guards are made of sturdy ABS and are easy to install by screwing them onto the bottom of the bait boat using the existing holes. Please note that screws are not included in the delivery content and must be purchased separately.

€19.00*
Carpmate Bait Boat Motor Pair
Carpmate Bait Boat Motor incl. Motor Coupler and Oil Seal
The BearCreeks Carpmate bait boat motor is a powerful and quiet engine that comes with a motor coupler and oil seal for the Carpmate bait boat. The motor is mounted in the bait boat hull using the appropriate motor bracket and connected to the motor trimmer for seamless operation. Please note that the matching propellers and screws are not included and must be ordered separately.

€55.00*
Antenna for 2.4GHz BearCreeks baitboats
Replacement Antenna for Bait Boat with 2.4GHz System
Replacement Antenna for BearCreeks Bait Boat with 2.4GHz system If you have lost an antenna or it happens to be defective, you can reorder it from us here. These antennas are suitable for the all bait boats from BearCreeks with 2.4GHz system. Scope of delivery: 1x antenna for the bait boat from bearcreeks.    

€19.49*
hook release rubber washer
Washer for hook release magnet
Washer for hook release magnet.

€0.80*
BearCreeks Carpmate bait boat LED-Loom set
Carpmate Bait Boat LED-Loom
The BearCreeks LED-Loom is a complete set designed for easy installation in both the upper and lower shell of the Carpmate Bait Boat. This set includes all necessary drillings and a main connector that connects directly to the mainboard, ensuring a hassle-free installation process. With no drilling required, this LED-Loom set is the perfect solution for enhancing your bait boat's visibility during night fishing sessions. Order now and experience the convenience and safety that this LED-Loom set provides.

€21.00*
22.02 %
Special Offer
BearCreeks Carpmate Top Hull BearCreeks Carpmate bait boat hull upper shell
Carpmate Bait Boat Top Hull and Bottom Hull
The Carpmate bait boat hull consists of both an upper and lower shell made from strong and impact-resistant ABS material. Its hydro-dynamic catamaran design is created through 3D CAD and precision injection moulding. With a 100% perfect fit, no gluing is required as the hulls are assembled and sealed with rubber gaskets and stainless steel screws. All necessary drillings for bait boat spare parts such as motors or LED lighting systems are already precisely prepared. The package includes the upper and lower shell boat hull and two battery covers. It is suitable for Carpmate, Waverunner Shuttle, Trend Micro, KINCARP V4, and Quad Kompact bait boats. The hull dimensions are 47 cm x 31.3 cm x 21.5 cm and include a recess for one release hook system and a feed chamber with a 2.0 kg capacity. Please Note: As BearCreeks is also an OEM manufacturer, the boat boat hulls may come with different logos or colours. If this is the case, we will randomly ship bait boat hulls with various logos or colours. 

€85.00* €109.00*
Bait Boat Propeller clips
Bait Boat Propeller clips
The propeller clip is a small, spring-loaded device that is used to secure a propeller onto a motor shaft. The clip fits onto the end of the shaft and grips the propeller securely, preventing it from slipping or coming loose during operation.

€4.00*

Comprehensive Guide to Bait Boat Parts for Carpmate, iPilot18, and NG18

Bait boats are a critical part of any angler's gear, helping them transport bait to the desired location with precision and efficiency. When it comes to bait boats, models such as the Carpmate, iPilot18, and NG18 stand out due to their superior functionality and durability. However, like any other piece of equipment, these bait boats require regular maintenance and occasional part replacements. This article will guide you through the various bait boat parts compatible with these models and provide useful insights into their use and importance.

Bait Boat Parts for the Carpmate Series

Carpmate is a popular series of bait boats from BearCreeks. These models, including Carpmate and Carpmate Pro, have earned their reputation in the angling community due to their reliability and efficiency. Maintaining them requires the use of compatible parts, such as propellers, batteries, motor parts, and more. Understanding each component's role in the boat's overall functioning can help users maximize their boat's performance and lifespan.

iPilot18 Bait Boat Components

The iPilot18 is another fantastic bait boat model that delivers high performance in both freshwater and saltwater fishing environments. iPilot18 bait boat parts range from hardware components like propellers and motors to advanced electronic parts, such as remote control systems and GPS modules. Regular checks and timely replacements ensure your iPilot18 keeps serving you optimally for a long time.

NG18 Bait Boat Replacement Parts

The NG18 is a high-tech bait boat model with numerous advanced features. To keep this piece of equipment operating at peak efficiency, users need to invest in quality NG18 bait boat parts. These parts include everything from basic body components to high-end electronic systems. Regular maintenance and replacement of these parts not only extend the boat's life but also significantly enhance its overall performance.

Compatibility with Other Bait Boat Models

It's important to note that many of these bait boat parts are not exclusive to the Carpmate, iPilot18, or NG18 models. They are also compatible with other popular bait boat models like the Waverunner SHUTTLE, Quad Bait Boat KOMPACT, Trend Micro, Vega Boat Micro, KINCARP V4, and Carproyal Duke. This cross-compatibility increases the availability of parts and makes it easier for anglers to find the right replacements when needed.

In conclusion, maintaining your bait boat is essential to ensure its performance and longevity. Whether you own a Carpmate, iPilot18, or NG18 model, using the right bait boat parts is crucial to keep your fishing expeditions running smoothly. Remember, regular checks and timely part replacements can save you from sudden breakdowns and costly repairs in the long run.

This website uses cookies to ensure the best experience possible. More information...