BearCreeks Bait Boat GPS 5.8GHz 4 Channel Digital Remote Control Manufactured by FLYSKY

BearCreeks 5.8GHz 4 Channel Bait Boat Digital Remote Control with GPS-Function

Full control of your bait boat, with the possibility of separate engine trim, speed adjustment for forward and reverse sail, adjustment of the LED light system, triggering of the feed flap opening and programing the GPS-Autopilot settings. You have the possibility to add 21 different fishing hot spots and you bait boat will drive automatically to these spots. Equipped with an easy-to-read display, which also shows the voltage of the battery and the boat battery. This remote control can be quickly connected to your baitboat with GPS without complex configurations. 

The joysticks on our remote controls were customized according to the habits and wishes of our customers.

• The left joystick (with the help of which you open the hopper doors and release the hook) is very sensitive, you just need to slightly push the joystick to the left or right and the needed function will be performed.
  PLEASE NOTE: do not continuously press the joystick, this will lead to magnets burnout and might damage the wiring.
• The right joystick (with the help of which you direct the boat) can be brought to the steady position, so that when you want to bring the boat 500m forward, you do not need to constantly press the joystick. It is enough to bring it to the steady position once and then manually bring it to the neutral position, when you would like to stop the boat.

This remote control is suitable for all baitboats with a 4 channel and 5.8Ghz system and fits for following models:

• BearCreeks Navitec Pro, Carpmate Pro, iCatcherPro, 
• KINCARP V2 V3 V4
• Anaconda WAVE HOPPER,

Not suitable for V6 models, Navimate or iCatcher Mini

Please note: The handset is delivered together with the receiver and the antenna.